Cal-Royal 1/4" Radius Corner 3.5" x 3.5" Stainless Steel Plain Bearing Mortise Hinge - Three Hinges
Decorate your homes doors with these handsome hinges from Cal-royal. Featuring stainless steel construction and a sensible plain bearing design this hinge serves to improve your doors at the fundamental level.
- Sold as Three Hinges Must be ordered in quantities of 3
- Plain Bearing Hinge
- Residential Strength
- Wood and Machine Screws Included
- 1/4" Radius Corners
- Traditional / Classic Theme
- Are Hole Pattern
Plain Bearing Hinge: Plain bearing hinges feature knuckles that are machined to a smooth surface, allowing them to move against one another without bearings. Plain bearing hinges are not recommended for heavy use on high traffic entrance ways, but meet the need of a standard residential door.
Material - Stainless Steel: Stainless steel reacts with oxygen in the air to form a very thin film of chromium oxide on the surface of the steel. This helps prevent the steel inside from rusting, and is great for homes in climates prone to rusting.
Mounting: The standard corners for mortised door hinges are 1/4" radius, 5/8" radius and square corner. It is recommended that three hinges be used on doors up to and including 7.5 feet with one additional hinge for each additional 2.5 feet. Make sure you check your current hinges before making a purchase.
- 3.5 Inch Height
- 3.5 Inch Width
- Made from Stainless Steel
- Mount: Mortise
- Gauge: 0.085" (Thickness of Hinge Steel)
- 5 Knuckles
- 8 Screw holes
Cal-Royal has focused on providing "Innovative and Value Added" hardware products and accessories to the builders industry since 1983. In accepting this charter, Cal-Royal has continued to be the leader in import hardware. Their product offering is designed to comply with the Americans with Disabilities Act (ADA) and to encompass all levels of ANSI classification, Grades 1, 2 and 3 as well as UL requirements. They offer a complete line of mortise locks, exit devices, door closers, hinges and many other hardware and trim products.
Additional Cal-Royal Links
Our SKU: Cal-Royal TBHRC-45
This product is listed under the following manufacturer number(s):
- Cal-Royal TBHRC45L2
Luma Dark Bronze
- Cal-Royal TBHRC4510B
Oil Rubbed Bronze
- Cal-Royal TBHRC453
- Cal-Royal TBHRC4526
- Cal-Royal TBHRC454
- Cal-Royal TBHRC4526D
*Denotes a finish or option that has been discontinued
|ANSI Certification||A5133, A8133|
|Corners||1/4" Radius Corner|
|Hinge Type||Butt Hinge, Plain Bearing|
|Number of Holes||8|
|Number of Knuckles||5|
|Screw Type||Machine, Wood|