This product has additional required/recommended options. To configure, add to your cart.
Installation Services Recommended
An elegant intersection of cylindrical shapes, Parma is clearly for the aesthetically adventurous. It offers an exciting range of designs, from our minimalist single handle pull-out and pull-down models to pot fillers.
Danze D455158 Product Features:
Danze D455158 Product Specifications:
Included with the Product:
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
I took a look at the Rohl RC3018 sink which I believe is the one you are referring to, and that sink has no sink holes, so you would have to mount this faucet through your counter top and yes it would mount just fine.
The Danze D455158 is unfortunately not available in a smaller size.
No, the Danze D455158 is set up for single hole mount installation. It is not meant to be used with an escutcheon because it raises the faucet too far off the deck for it to be as steady as intended.
The Danze D455158 is equipped with two spray fucntions. When the hand spray button is pressed on the nozzle, the flow will be concentrated for hand spray purposes. Otherwise the flow of the water will be similar to that of a regular faucet.
The Danze D455158 does not require any air gaps.
The Danze D455158 can be used in conjunction with any standard escutcheon plate that is intended to be used with kitchen faucets.
Temperature and volume is controlled on the same lever. Forward and backward controls the Temperature. Moving the lever from side to side controls the volume
The Danze D455158 has a sprayer head that is made of very dense plastic for safety. Most faucets are this way to keep the spray head from getting too hot.
The Danze D455158 is fairly flexible, yes. As a solid spring style, it's still a bit rigid and doesn't have the full range of flexibility as a regular pull out faucet, but it will be sufficient to reach the areas of your sink.
The Danze D455158 faucet will have a two function toggle switch and you will not need to hold down the button to change from stream to spray.
The Danze D455158 is pulls down and does not pull far enough for the coil to straighten out.
The Danze D455158 does have a swivel spout.
You should have no problem with this faucet working. With 40PSI you will get about 1.5 gallons per minute. I encourage you to look at the review we have for this faucet.
The Danze D455158 is not spring loaded, so there is no need to worry about that.
The Danze D455158 is 22 13/16" high from the deck.
The Danze D455158 has a spout height of 6 11/16". On our web page is the specification sheet for review.
The country of origin for the Danze D455158 is China.
The Danze D455158 is made in China.
Yes, The Danze D455158 will work with the Hansgrohe 14019861 escutcheon plate.
The Danze D455158 is capable of being installed in the way you requested.
The Danze D455158 can be installed with the handle on the left or right side.
You might consider the Danze escutcheon D493172 or Danze D495958 soap dispenser.
The Danze D455158 hose is 32 inches long at full extension.
The Danze D455158 in classic stainless is more satin than polished, the chrome finish is polished.
The Danze D455158 is made of solid cast brass.
The internal hose of the Danze D455158 is made of metal.
The Danze D455158 is made of hard plastic.
The Danze D455158 hand spray has plastic/rubber buttons that allow you to switch spray modes. Please let me know if you have any further questions.
The Danze D455158 has a 2 5/16 diameter base. It will fit a typical faucet hole cut of anywhere between 1 1/2" to 2" in diameter.
The Danze D455158 is roughly 9 lbs.
The Danze D455158 is compatible with a decorative escutcheon to cover two holes on a three hole sink. However, we can not guarantee a perfect fit and finish between different brands of faucets and escutcheons.
This faucet with the spray head in the docking position can swivel 10" around. For a triple sink you'll most likely have to manually spray to have it reach.
The Danze D455158 in stainless steel will be satin.
I apologize, I'm not sure what you mean. The spout height of 6 11/16 is how high the spout sits from the base of the faucet. It it designed to sit that high in the cradle and isn't able to be adjusted. I apologize if I misunderstood the question.
Yes, you can swivel the nozzle when the sprayer is in use.
The VG17001 is not compatible with the Danze D455158
The Danze D455158 handle temperature does not increase with hot water use.
The Danze D455158 will fit through a 1-3/8” hole.
Yes, The spring on the Danze D455158 can be removed for cleaning.
The Danze D455158 has a 360° swivel so yes, you could install this to where the handle is on the front facing you, rather than on the side.
| Spout Swivel | 360 |
|---|---|
| Faucet Holes | 1 |
| Handle Material | Metal |
| Spout Height | 6.6875 |
| Faucet Centers | 0 |
| Height | 22.8125 |
| Low Lead Compliant | Yes |
| Pre Rinse | Yes |
| Theme | Contemporary / Modern, Functional |
| ADA | Yes |
| Spout Reach | 10 |
| Max Deck Thickness | 2 |
| Spout Type | Swivel |
| Valve Type | Ceramic Disc |
| Flow Rate (GPM) | 2 |
| Escutcheon Included | No |
| Filtering | No |
| Width | 4.4375 |
| Eco Friendly | Yes |
| Material | Brass |
| Sidespray | No |
| Handles Included | Yes |
| Installation Type | Deck Mounted |
| Soap Dispenser Included | No |
| Pullout Spray | Yes |
| Handle Style | Lever |
| Number Of Handles | 1 |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store
