Can this canopy be mounted vertically?
The Designers Fountain 96130 is made to be mounted vertically.

| Shipping: | Free Shipping! See Details |
|---|---|
| Ships In: |
This product leaves the warehouse within 24 hours
|
| Finish: |
Natural Iron
|
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
The Designers Fountain 96130 is made to be mounted vertically.
The Designers Fountain 96130 can only be mounted with down rods.
The Designers Fountain 96130 is suitable for a medium based fluorescent bulb.
The Designers Fountain 96130 comes in the Natural Iron finish. It's a full black finish.
The Designers Fountain 96130 is 19.75" without the down rods. What are you working on?
The canopy diameter for the Designers Fountain 96130 is 5.25".
The Designers Fountain 96130 can be installed on a sloped ceiling.
The Designers Fountain 96130 may be feed into one electrical box and wired to the same transformer.
The Designers Fountain 96130 is 19.75" without the down rods.
The Designers Fountain 96130 is 55.25" in height.
The Designers Fountain 96130 can be used with only the 6" downrod for minimal length.
The Designers Fountain 96130 has a shade width of 7-1/4".
The Designers Fountain 96130 can be hung at any length. It is user preference. It does come with a 6, 12 and 18" down rod, which you can use to obtain your desired length.
Yes, the Designers Fountain 96130 can be mounted using any variation of the down rods. Installing with the 6" would leave the fixture at about 25" overall.
The color of the shade on the Designers Fountain 96130 is a light tan beige tone, slightly translucent and towards the rim of the shade there is a brown tone.
The Designers Fountain 96130 height of shade 4-1/4". Thanks for your question and have a great day!
The rods for the Designers Fountain 96130 are threaded on both ends and so can't be cut.
The down rods cannot be cut.
The Designers Fountain 96130 is CSA approved.
The Designers Fountain 96130 can be used with only the 6" downrod and then with wire if you prefer.
The Designers Fountain 96130 is 17.75"h without any downrods.
The Designers Fountain 96130 uses a 100 watt bulb. If this would be sufficient for you needs, then it should be fine.
| Bulb Base | Medium (E26) |
|---|---|
| Number of Bulbs | 1 |
| Height | 55.25 |
| Light Direction | Down Lighting |
| Theme | Tuscan |
| Width | 7.25 |
| Wattage | 100 |
| Category | Sale, Top Rated |
| Configuration | Pendant |
| Collection | Barcelona |
| Energy Star | No |
| Bulb Type | Incandescent or Fluorescent |
| Watts Per Bulb | 100 |
| Pendant Type | Mini |
| Suggested Room Fit | Kitchen |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store