I am replacing a current set that is 3 3/4" high. What are the total dimensions of the lockset?
A. The dimensions are height: 3 1/2 and width 2 3/8.
Is a locking tab also present on the other side, or does it have a slotted fitting?
A. The Emtek 2102 has the slotted fitting on the opposite side.
Is the emtek 2102 available with one finish on one side and a different finish on the other side? If so, how do I order this?
A. The Emtek 2102 is only available as a single finish item, cannot do a split finish.
Is this reversible? If so, I don't see how to order the specific handing I need.
A. The Emtek 2102 is reversible. Can be used for left or right handing.
whats the standard hight where to put the lock on the door?
A. The standard hight where to put the lock on the door veries but normally 3' from floor to the bottom of the handle Emtek 2102.
As this is a pocket door lock, it needs a different bore than the standard round hole?
A. This requires a standard rectangular door prep of 3-1/8" x 1-3/4".
Can this be installed for either side to have the lock handle?
A. Thank you for your question! The Emtek 2102 is reversible.
If you used this on double pocket doors and installed a dummy (2201) on the opposing door, would the doors lock?
A. Yes, if you used this on double pocket doors and installed a dummy (2201) on the opposing door, the doors would lock.
Will Emtek 2102 fit a door 1 5/8" thick?
A. The Emtek 2102 will fit a 1-5/8" thick door.
Will this work on a double pocket door set?
A. You can install this on one side fo the door. You will need to install a dummy version or a flush pull on the opposing door. One example would be the Emtek 2201.
Buy the Emtek 2102SS in Satin Steel at Build.com. Research Emtek 2102SS in Satin Steel online. Find Emtek 2102SS in Satin Steel features and specifications. Get the best deal by comparing the Emtek 2102SS in Satin Steel today.