How deep is the recess?
A. The Emtek 2201 requires a cut out depth of 13/16.
What is the projection of the lip past the face of the door?
A. The Emtek 2201 is a flush pull so it should not project very far. They do not give that dimension, but I couldn't imagine it projecting more than 1/16".
Do I need to order 2 of these to have one on each side of the door or is it a set of 2? Also, do I also need to order the Emtek 2221 to have a pull on the end, and if so will it work in conjunction with these 2 pulls?
A. The Emtek 2201 is only one side. Two would need to be ordered if you wanted one on each side. You can use a 2221 with the 2201. I hope this helps!
What is the depth of the flush pull. Q2 and Q4 show completely different depths or recesses and doesn't correlate with 3/8" and 13/16"
A. The Emtek 2201 is 3/8" deep.
What is the dimension of the hole that must be routed in the door?
A. The Emtek 2201 requires a hole that is 1-7/16" wide by 3-5/8" tall and by 3/8" deep.
Buy the Emtek 2201US15 in Satin Nickel at Build.com. Research Emtek 2201US15 in Satin Nickel online. Find Emtek 2201US15 in Satin Nickel features and specifications. Get the best deal by comparing the Emtek 2201US15 in Satin Nickel today.