Durango Single Cylinder Keyed Entry Sandcast Bronze Leverset
Emtek's single cylinder leversets use traditional American locks, complete with a variety of trim styles, handcrafted from authentic materials. The leverset is operated by a key from the exterior, and a thumbturn from the interior. Uncompromisingly rugged and beautifully crafted, these locks are suitable for the very finest homes.
Emtek's Sandcast Bronze Collection is cast from molten bronze one piece at a time into authentic rustic designs. The Sandcast Collection's patina finishes are achieved using the traditional techniques of bronze sculptors. With pitted surfaces and hand-finished patinas, these uniquely American designs resonate a calm strength. The Sandcast Bronze Collection's knob / lever handles are supported by springs mounted behind the rosettes and sideplates, which return the handles back to the rest position and prevent lever sag. The latches are heavy-duty die cast construction, with strong internal springs, solid brass nose bolts, and sintered metal cams. A plastic bushing located in the joint between the handle and the rosette ensures a friction-free wear surface, preventing metal from bearing on metal and providing smooth, long-lasting operation. Handles are positively connected to rosettes with a permanent clip. Each has a set screw which eliminates "handle wobble" when tightened. Emtek's threaded tubes are machined brass to ensure good threads and prevent corrosion.
- Standard Door Prep
- Schlage C Keyway
- Solid Cast Bronze Trim
- Lever Width: 5"
- Lever Projection: 2-3/4"
- Door Thickness: 1-3/8" to 2-3/4" (Please specify)
- Backset: Adjustable Latch for 2-3/8" or 2-3/4"
Emtek is dedicated to bringing interesting, well made hardware back into American homes. Emtek's mission is to satisfy the higher expectations of today's homeowners with regard to door locks. They strive to provide a broad and interesting range of products that consumers can use as elements of decor, and not just as a way to latch a door.
Additional Emtek Links
Our SKU: Emtek 510D
This product is listed under the following manufacturer number(s):
- Emtek 510DDB
- Emtek 510DFB
- Emtek 510DMB
- Emtek 510DSP
*Denotes a finish or option that has been discontinued
|Supplemental Installation Guide|
|Backset||2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"|
|Door Thickness||1-1/2", 1-3/4", 1-3/8", 1-5/8", 1-7/8", 2", 2-1/2", 2-1/4", 2-1/8", 2-3/4", 2-3/8", 2-5/8"|