Emtek's passage knobsets use traditional American latches complete with a variety of trim styles, handcrafted from authentic materials. The knobset is operated by a knob from both the interior and exterior. With the passage function, the door does not lock from either side. Uncompromisingly rugged and beautifully crafted, these locks are suitable for the very finest homes.
Emtek's Sandcast Bronze Collection is cast from molten bronze one piece at a time into authentic rustic designs. The Sandcast Collection's patina finishes are achieved using the traditional techniques of bronze sculptors. With pitted surfaces and hand-finished patinas, these uniquely American designs resonate a calm strength. The Sandcast Bronze Collection's knob / lever handles are supported by springs mounted behind the rosettes and sideplates, which return the handles back to the rest position and prevent lever sag. The latches are heavy-duty die cast construction, with strong internal springs, solid brass nose bolts, and sintered metal cams. A plastic bushing located in the joint between the handle and the rosette ensures a friction-free wear surface, preventing metal from bearing on metal and providing smooth, long-lasting operation. Handles are positively connected to rosettes with a permanent clip. Each has a set screw which eliminates "handle wobble" when tightened. Emtek's threaded tubes are machined brass to ensure good threads and prevent corrosion.
- Standard Door Prep
- Solid Cast Bronze Trim
- Knob Height: 2-3/4"
- Knob Width: 1-1/2"
- Projection: 3"
- Material: Cast Bronze
- Door Thickness: 1-3/8" - 3"
- Backset: 2-3/8" or 2-3/4"
Emtek is dedicated to bringing interesting, well made hardware back into American homes. Emtek's mission is to satisfy the higher expectations of today's homeowners with regard to door locks. They strive to provide a broad and interesting range of products that consumers can use as elements of decor, and not just as a way to latch a door.
Additional Emtek Links
Our SKU: Emtek 710BZEG
This product is listed under the following manufacturer number(s):
- Emtek 710BZEGDB
- Emtek 710BZEGUS19
- Emtek 710BZEGMB
- Emtek 710BZEGSP*
- Emtek 710BZEGTWB
Tumbled White Bronze
*Denotes a finish or option that has been discontinued
Emtek 710BZEGUS19 Product Specifications
|Door Thickness||1-1/2", 1-3/4", 1-3/8", 1-5/8", 1-7/8", 2", 2-1/2", 2-1/4", 2-1/8", 2-3/4", 2-3/8", 2-5/8", 2-7/8", 3"|
|Latch Faceplate||Drive-In, Round Corner, Square Corner|
|Rosette Shape||Arch, Rectangle, Round|
Installation Resource Center
Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.