Will a AZ7A12W2/7A fit into the sleeve I have for an older Fedders unit (model A1A10W7B)?
The Fedders AZ7A12W7A will fit into any Fedders "B" series Sleeve.

A powerful solution for keeping cool during those sweltering summer months, the Fedders 11,800 BTU through-the-wall air conditioner is perfect for rooms without window access, or for those who don't want to block their view to the outside world. Easily covering a 550 square foot area, the AZ7A12W7A comes standard with electronic three-speed controls with LED display, four way adjustable air direction to ensure your cool air is being directed to exactly where you need it, and a built in air exchanger that removes stale air and odors, recirculating in fresh outside air. Further, the AZ7A12W7A includes both an auto cooling feature and a full-featured remote control, giving you unparalleled control over your comfort. Throw in a coveted Energy Star rating, and you can start saving time and money the minute you turn it on. Comfort has never been this easy to obtain, trust Fedders to deliver it.
Features:
Specifications:
For over 40 years, Fedders has built a reputation for itself, becoming one of the most recognized and highly respected names in the industry. Known not only for the reliability and quality of the products they produce, but for stepping up and becoming a driving force in the market. As the preeminent environmentally friendly manufacturer in the Western Hemisphere, Fedders knows that conservation of natural resources and protecting the environment is just as important as providing a quality experience to their customers. Through hard work and innovation, Fedders has found a way to accomplish both.
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
The Fedders AZ7A12W7A will fit into any Fedders "B" series Sleeve.
The Fedders AZ7A12W7A will not need to have a replacement grill.
The Fedders AZ7A12W7A does not come with the sleeve. This unit will fit directly in the Fedders BSA000C sleeve. The sleeve is installed into the wall, and then the actual appliance fits into the sleeve. You can't install this without a sleeve because the sleeve becomes the housing for the unit.
The Fedders AZ7A12W7A is 15.62 inches high, 26 inches wide and a depth of 16.87 inches. I hope this answered your question. Please let me know if you need any further assistance.
The Fedders AZ7A12W7A comes with the baffle kit.
The sleeve designed for the Fedders AZ7A12W7A is 27 x 16-3/4 x 16-3/4. Presuming the depth of your sleeve is also 16-3/4, (you will definitely want to check this) then this unit should fit in your current sleeve.
The plug has two side-by-side horizontal prongs and a round ground underneath.
The Fedders AZ7A12W7A will fit both A and B sleeves.
The Fedders AZ7A12W70 drains into traps. The traps will still need to be cleaned manually.
The Fedders AZ7A12W7A is meant to go inside the sleeve without removing the housing. I hope this helps!
Assuming the Sears sleeve is roughly 27 inches wide, 16 inches tall, and 18 inches deep, this would fit it.
The Fedders AZ7A12W7A weighs approx 75 lbs.
the Fedders AZ7A12W70 drains into traps. The traps will still need to be cleaned manually.
The Fedders AZ7A12W7A unit measures 26" W x 15-5/8" H x 16-7/8" D
Just when its dirty.
The Fedders AZ7A12W7A air conditioner uses the Fedders BSA000C sleeve.
The Fedders AZ7A12W7A will fit directly in a b sleeve.
The Fedders AZ7A12W7A is a 115 volt unit.
| Voltage | 230 |
|---|---|
| BTU Cooling | 11800 |
| Height | 15.625 |
| Control Type | Electronic |
| Cooling Area | 550 |
| Width | 26 |
| EER | 9.8 |
| Installation Type | Through Wall |
| Fan Speeds | 3 |
| Annual Operation Cost | 78.08 |
| CFM | 280 |
| Includes Remote | Yes |
| Energy Star | Yes |
| Depth | 16.875 |
| Includes Thermostat | Yes |
| Heater | No |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store