18" Wood Basevent Register - Trimline Basevent
nice wood construction
I chose the white oak unfinished product and found the craftsmanship to be of good quality. The joints were tight and were sanded smooth. It only needed a light sanding before staining and between coats of poly.
However I was disappointed with 2 aspects of the product. There was no backing plate that I could secure the vent to the wall. This required predrilling and using finish nails which distracted from the finished product. The other drawback was the optional damper assembly. It was not centered by rather slightly to one side. I suppose that it was designed to rub on the side to allow for adjustability of the opening. I would have preferred adjustable detents to lock it in position.
May 14, 2013
The basevents are an excellent choice. They are available in a variety of woods and unfinished, so you should be able to match just about anything. The vents themselves are well made and work well, dimensions are rather precise and standard, so they replace a number of standard registers. Thanks.
June 20, 2010
Beautifully Finished Product
The product quality was excellent and it was far superior to other wood baseboard diffusers I had looked at. I saw one at Home Depot and it was very disappointing.
The product arrived nicely protected and they look beautiful in our home.
November 15, 2010
exactly what I ordered, Now
I ordered a pair on Vents that were not the right shade of finish to match my existing wood trim. I returned them and ordered unfinished ones, and applied my own stain. All is well in Mudville.
March 23, 2012
These were priced very well and very high quality. Rest assured that you are buying from a direct source with prompt shipment, they said ten days but it was only three days.
September 24, 2013
The Base Vent 18 inch is great. I ordered a clear finished version and it arrived in perfect condition and great quality. Very pleased with this product.
January 22, 2011
The vents look great in our home remodel. Wish that you Venting Direct would also make Baseboard Air Return Grilles for 14 x 6 in oak.
March 22, 2012
Ordered registers without T-Slots on back sides and recieved them as standard production, off the shelf, with T-Slots
January 13, 2011
Beautifully made with uniform slats and nicely sanded. I ordered this with the damper and it works well.
June 19, 2011
This product was exactly what I was looking for! I am very pleased.
April 23, 2011