Learning CenterHow To Install Vanity Lighting

How To Install Vanity Lighting

Follow Chrysten's step-by-step instructions for replacing a vanity light.

Park Harbor Antonia, single and double light fixtures, bathroom vanity.

This simple DIY project can change the look of your bathroom in under an hour.

NOTE: Vanity lighting can vary across manufacturers, so this is meant as a general guide. Be sure to follow the installation instructions provided by the manufacturer.

Tools/Materials

  • New vanity light fixture
  • Wire cutters
  • Screwdriver
  • Wire caps

Step 1

 Since you’re working with electricity, cut the power to the room at the junction box.

Turning off power at the junction box from the home's breaker box.

Step 2

Remove the old vanity light. When removing the wires, be sure to keep them separate.

Taking down old fixture.

Step 3

Attach the mounting plate to the junction box using the screws provided.

Woman using screw driver to mount new plate to junction box.

Step 4

 Connect the wires (white to white and black to black, with the copper wire attaching to the mounting plate), and secure them with wire caps. You may need an extra set of hands to hold the lighting fixture while you connect the wires.

Connecting wires, white to white and black to black.

Step 5

Attach the new vanity light to the mounting plate. Be sure to tighten any adjustment screws on the mounting plate.

Attaching new vanity light to the mounting plate and tightening screws.