InSinkErator HOT-1 Single Handle Hot Water Dispenser

Shipping:	Free Shipping! See Details
Ships In:	1 to 2 business days
Finish:	Polished Stainless Steel

Shipping:

Free Shipping! See Details

Ships In:

1 to 2 business days

Finish:

Polished Stainless Steel

Product Details for the InSinkErator HOT-1

Single Handle Hot Water Dispenser

InSinkErator knows that once homeowners have an instant hot water dispenser, they never want to be without one again. After all, we virtually created this popular kitchen product, and we're still the one that makes it best. With instant, near-boiling 200 water right at your kitchen sink, you can simplify countless cooking and cleaning tasks.

Hot Only 1/3 gallon tank delivers 40 cups of near boiling 190 degree Fahrenheit water per hour
1-Year We Come To You In-Home Service Warranty
115 volts, 500 watts, 4.3 amps
UL and NSF listed and NSF certified
Available in polished stainless steel with black handle
Capacity: 1/3 gallon tank dispenses 40 cups of 190 degree Fahrenheit water per hour
Electrical: 115 volts A.C, 500 watts, 4.3 amp heating element with grounded three (3) prong plug
Thermostat: Snap-action, adjustable from 160 degrees Fahrenheit to 200 degrees Fahrenheit (factory pre-set at approximately 190 degrees Fahrenheit)
Construction: Copper tank, valve, and tubing
Hot Valve: Instant, self-closing
Shipping Weight: Approximately 4 lbs.
Required Hole Diameter: 1 1/4" - 1 1/2"

Our SKU: InSinkErator HOT-1

This product is listed under the following manufacturer number(s):

InSinkErator HOT-1C
Polished Stainless Steel

*Denotes a finish or option that has been discontinued

Product Reviews

Single Handle Hot Water Dispenser 2.5 5 13 14

HOT-1 I had owned one of these several years ago. When it finally wore out I went several years with out one. Having recently installing an on demand whole house water heater I determined I needed a quicker source of hot water in my kitchen. The HOT-1 was the answer. It gives me instant hot water for many kitchen needs. The one change in the design that I would recomend would be to have more spring in the dispenser handle as it drops too low for my liking. July 10, 2011

21 years old and still heating water My HOT-1 came with the purchase of my home, 21 years ago - I'm replacing the plastic handle for the third time. I have no way of knowing how many cups of tea, cocoa, instant soup, and other uses this machine has had, but it's a time saver and has paid for itself many times over. When it dies, I'll buy the more expensive model with the handle that twists. March 13, 2011

Problems! I have purchased 6 of these for townhomes I am building out. I have had to replace 3 of them. They leak at the top or do not get hot after just a few months. DO NOT BUY! December 1, 2010

Pretty handy Just died after 7 years. aboout 1 year ago cheesy plastic handle broke but called company 800 # and the sent me handle free + back-up and I got it in about 4 days and took maybe a minute to replace with no disassembly required. Coppert tank ultimately corroded thru. A handy item and generally quite satisfied. Install is very easy. March 27, 2009

DO NOT BUY!! We purchased the HOT-1 as part of a kitchen remodel in June 07. We have been very disappointed - very loud rumbling when heating up every 20 minutes, leaking around the gasket where it meets the countertop, and inferior plastic handle that feels like it will break at any time. We are fearful of a major tank leak under the sink! We are currently looking to replace with H-WAVE-SS for the stainless steel tank, quieter heating intervals and solid brass/metal handle. I would not recommend this product to anyone! January 24, 2009

broken handle I have used this product for a little over a year. The handle broke today. This is the first time I owned this brand instant hot water heater. This one is noisy and the handle braking in just a little over a year makes me think the product is inferior to the other brand, I owned for far more years. December 5, 2008

I can't do without this! I've had one of these (exact same model) for over 6 years. I LOVE it! I had used one at my friend's house and immediately got one of my one. It was easily installed, and worked perfectly until it finally just died -- the element wore out. I think six years was a great life span and I had ZERO problems with it during that time. I just bought a new one and it is working great! I would recommend this to anyone that makes hot tea, instant soup or just likes to get boiling pots of water started ultra fast! November 3, 2008

Broke Handle Yep...Mine broke too. It does heat the water well. It also makes loud noises when it heats up. Parts seem hard to find. May 15, 2008

HOT-1 is very loud We installed this hot water dispenser in July during a kitchen remodel. It performs well in terms of delivering hot water and we have found it easy to use, clean, and we enjoy having instant hot water. It unfortunately is also VERY loud when it heats the water in the tank. About every 20 minutes when it heats the water it makes a very loud rumbling sound that is loud enough to disrupt coversation or distract us from watching a movie in the next room. Friends who come over for the first time always stop mid-conversation to ask us what the noise is. We contacted InSinkErator and followed their directions for lowering the temperature setting and while it helped a little bit it is still loud. We inquired about insulating the heater under the counter but InSinkErator indicated that insulating the tank would violate the warranty. The rumbling only lasts a minute but we will never put in another tank hot water dispenser. January 19, 2008

Loving it! I have had this in my home for just over two years now, I absolutely love it. It's nice to have hot water on demand when you need it. One thing I like to point out when recommending it is that the water does not dispense faster if you push harder on the handle. The flow is not that of a regular faucet as this is a smaller unit. Works great for me! December 31, 2007

1-10 of 14

4 Questions from the Community

Loading nanoRep

When you order the dispenser, does the tank come automatically or do you need to buy each separately?

The InSinkErator HOT-1 comes with a 1/3 gallon tank that dispenses 40 cups of 190 degree Fahrenheit water per hour.

will this item fit a 1 1/2" countertop without needing extension?

The InSinkErator HOT-1 can fit 1-1/2 to 3" counter tops.

Can I replace just the insinkerator tank for the hot water dispenser?

Absolutely. Insinkerator makes the W152, W154, and the SST-FLTR.

Can I replace just the faucet and "above counter" parts of the insinkerator?

The Hot-1 is just the faucet; it is not the hot water tank. The hot water tank does not have to be purchased in conjunction with the faucet.

Technical Specs

Faucet Holes	1
Spout Height	3.31
Voltage	120
Faucet Hole Size	1.38
Height	5.50
Dispenser Type	Hot Only
Filtering	No
Theme	Functional
Spout Reach	3.56
ADA	No
Wattage	500
Material	Brass
Handles Included	Yes
Amperage	4.3
Installation Type	Deck Mounted
Capacity (Cups/Hour)	40.00
Number Of Handles	1
Max Deck Thickness	2.00

Faucet Holes

Spout Height

3.31

Voltage

120

Faucet Hole Size

1.38

Height

5.50

Dispenser Type

Hot Only

Filtering

Theme

Functional

Spout Reach

3.56

ADA

Wattage

500

Material

Brass

Handles Included

Yes

Amperage

4.3

Installation Type

Deck Mounted

Capacity (Cups/Hour)

40.00

Number Of Handles

Max Deck Thickness

2.00

Why don't we show the price?

Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.

To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.

Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.