The Model A-42 features a 90 degree left/right, industry standard 42 inch, ventilated steel swivel board, giving you flexibility in confined areas like corners in the laundry room or kitchen. Other standard features include a solid-state, silent timer, built-in work light, electrical outlet, on/off pilot light, hot iron and accessory storage, and easy, 4 inch height adjustment. The A-42 also has an optional sleeve board.
42" Built In Ironing Center
Comes standard with birch veneer door.
Power timer and outlet.
4" Height adjustment.
Door opens approximately 180 degree. Allow at least 16" to the side of the unit for door to swing open (door hinges on full length piano hinge).
Ironing Board Cover and Pad are included.
The interior has been painted a cool gray.
90 degree left or right board swivel action.
Unit may be surface mounted (unit extends approximately 7 3/8" into room) or recessed (unit extends approximately 3 1/2" into room) into any wall with standard 16 inch center studs.
See table in specification sheet to determine desired ironing board height above the floor. The user can adjust height of board after installation with a 4" differential between a maximum and minimum height.
Simple Install! Identify the location, cut and remove the drywall, slip the unit between the studs and attach it with the installation screws provided.
All models are preassembled and ready to install.
Fits between standard 2 x 4 studs on 16" centers. Install at the height of your choice, typically 34"-36" from the floor.
Recommended to attach 2" x 4" cleats to studs, level with the bottom of opening (for support when recessing unit).
120V, 15 Amps.
Pigtails are provided in bottom of wireway for hookup to supply line. Make entrance into knockouts provided in top and bottom of wire way through left-hand vent hole.
Unit can be provided with a left hinged door (without garment hook) upon request. Right hinge is standard.
Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.
Iron-A-Way A-42 Reviews
Rated 5 out of
ironing centerGreat product. Makes ironing very convenient. No hassle of retrieving a board and iron. Relatively easy installation. Hardest part was running electrical. Essentially installs with 4 screws. Instructions doesn't take into account for electrical conduit for screw hole. Electrical conduit is a bit messy with wires. Besides that i have no complaints. This website was the best price i found considering shipping and tax.
Date published: 2008-11-10
Rated 5 out of
Iron-A-Way Ironing CenterGreat product good quality, we love the convenience .
Date published: 2012-07-03
Rated 5 out of
no no from
It is a great piece I love it. Thank you.
Date published: 2014-09-19
Rated 4 out of
Convenient Storage cabinethubby installed this cabinet in bathroom.....while the iron does not fit in closed cabinet, the cabinet is still a great convenience. Was shipped and rec'd as ordered.
Date published: 2013-06-18
Rated 5 out of
Great Value on Built-in Ironing BoardBest online price found for this model and saved an additional $25 with online savings code. Also had option for left-hand door which many other stores don't have. Installation was easy (did it myself) and everything works great! Would definitely recommend.
Date published: 2013-05-14
What is the flat white door made of and how is it finished?
A. Thanks for your question. The Iron-A-Way A-42 in the flat white is made of wood with a wood veneer on top. Let me know if you have further questions.
is the board stainless?
A. The Iron-A-Way A-42 is made from steel.
Does a Rowena iron fit the A-42?
A Rowena iron should fit in the A-42 unit.
How flat does the door lay when it is all the way open? Will it lay flat against the wall, or extend a few inches?
The Iron-A-Way A-42 opens a full 180 degrees, so it will lay flat to the wall.
Does this only work at the swivel angle, or can the board be used straight as well?
The Iron-A-Way A-42 can be used with the board straight as well as angled.
What is the depth in inches to allow an iron to fit and the door to close?
The interior depth of model A-42 is 7.75"
Does the Birch finished door have a raised panel or is it flat?
The Iron-A-Way A-42 has a flat panel on the front.
Buy the Iron-A-Way A421AU in Birch at Build.com. Research Iron-A-Way A421AU in Birch online. Find Iron-A-Way A421AU in Birch features and specifications. Get the best deal by comparing the Iron-A-Way A421AU in Birch today.
The cost to ship items varies by item, shipment and shipping option.
Free Ground Shipping on Orders Over $49 *
Standard ground shipping transit time is 5-7 business days.
Free Freight Shipping on Orders Over $1500 *
Curb side delivery (also called freight or "LTL" shipping) is reserved for large, heavy, or oversized items like chandeliers, bathtubs, shower doors, etc. Items are palletized and loaded onto a large truck for shipment, and delivered to your curb by scheduled appointment. Transit time is 7-10 business days.
* For exact shipping costs, add the product(s) to your cart and enter your zip code. All offers pertain to the lower 48 states and do not include deliveries to Alaska, Hawaii or Canada.