Iron-A-Way 42 Inch Built In Deluxe Swiveling Ironing Center

The Model A-42 features a 90 degree left/right, industry standard 42 inch, ventilated steel swivel board, giving you flexibility in confined areas like corners in the laundry room or kitchen. Other standard features include a solid-state, silent timer, built-in work light, electrical outlet, on/off pilot light, hot iron and accessory storage, and easy, 4 inch height adjustment. The A-42 also has an optional sleeve board.

42" Built In Ironing Center

Features:

• Comes standard with birch veneer door.
• Power timer and outlet.
• 4" Height adjustment.
• Door opens approximately 180 degree. Allow at least 16" to the side of the unit for door to swing open (door hinges on full length piano hinge).
• Ironing Board Cover and Pad are included.
• The interior has been painted a cool gray.
• 90 degree left or right board swivel action.

Surface Mounting:

• Unit may be surface mounted (unit extends approximately 7 3/8" into room) or recessed (unit extends approximately 3 1/2" into room) into any wall with standard 16 inch center studs.
• See table in specification sheet to determine desired ironing board height above the floor. The user can adjust height of board after installation with a 4" differential between a maximum and minimum height.

Installation:

• Simple Install! Identify the location, cut and remove the drywall, slip the unit between the studs and attach it with the installation screws provided.
• All models are preassembled and ready to install.
• Fits between standard 2 x 4 studs on 16" centers. Install at the height of your choice, typically 34"-36" from the floor.
• Recommended to attach 2" x 4" cleats to studs, level with the bottom of opening (for support when recessing unit).

Electrical:

• 120V, 15 Amps.
• Pigtails are provided in bottom of wireway for hookup to supply line. Make entrance into knockouts provided in top and bottom of wire way through left-hand vent hole.

Accessories:

• Unit can be provided with a left hinged door (without garment hook) upon request. Right hinge is standard.
• Replacement Cover Pad
• Garment Bar
• Hinge Hardware
• Hot Iron Rest
• Iron
• Sleeve Board
• Surface Mount Trim