Can the K-12177 be used with a Kohler K5965, 3 hole sink? Is a special screw and washer required?
The Kohler K-12177 does not take any special screws or washers, and it will work with a 3 hole sink.

This product has additional required/recommended options. To configure, add to your cart.
Reflecting the glamour of a bygone era, this Fairfax faucet offers an elegant finishing touch for your kitchen sink. The high spout is designed to reach over the tallest pots, while the pullout sprayhead features a stream-to-spray touch-button for maximum flexibility.
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
The Kohler K-12177 does not take any special screws or washers, and it will work with a 3 hole sink.
The spray feature on the Kohler K-12177 can be used without holding the button down. The button just selects which spray feature you wish to use.
The Kohler K-12177 pull-out sprayer is made of plastic.
The Kohler K-12177 pullout kitchen faucet can be installed either with or without the 10" escutcheon plate.
The Kohler K-12177 has a spout reach of 9" from the center. The 6625 is a counter mount sink with no faucet holes. So, you can mount the faucet anywhere you wish. But, with only a 9" reach, we wouldn't recommend center mounting so you can have proper clearance to the smaller basin.
The Kohler K-12177 is Assemled in the US, the parts come from all over but it is made in teh US. Kohler is also based in the US and offer great warrantys and customer care.
The Kohler K-12177 can be removed by tapping the handel up with a rubber mallet. The valve stem and the handle lften fuse together so be sure to have a replacement valve stem on hand.
Any faucet that has a swivel neck to it should be able to be installed with the handle on the left side opposed to the right side. You would set at time of installation.
The Kohler K-12177 Single Handle Pullout Kitchen Faucet from the Fairfax Series is 8.375" tall.
The Kohler K-12177 is Assemled in the US, the parts come from all over but it is made in teh US. Kohler is also based in the US and offer great warrantys and customer care.
The Kohler K-12177 spray head, itself, will be a metal coated plastic to keep it from being too heavy.
The Kohler K-12177 has a metal head.
The entire Kohler K-12177 must be replaced with this type of damage.
The Kohler K-12177 hose assembly is the Kohler 105633.
The push button is not sold separately. You will have to purchase the full wand in replace the push button. The original part number for the wand is 1000996, however it has now been replaced by the model number 1152299.
| ADA | Yes |
|---|---|
| Category | Kitchen Faucets, Pullout Kitchen Faucets |
| Country Of Origin | USA |
| Eco Friendly | No |
| Escutcheon Included | Yes |
| Faucet Centers | 8 |
| Faucet Holes | 1 |
| Faucet Type | Kitchen Faucet |
| Filtering | No |
| Flow Rate (GPM) | 2.20 |
| Handle Material | Metal |
| Handle Style | Lever |
| Handles Included | Yes |
| Height | 8.375 |
| Hose Length | 33 |
| Installation Type | Deck Mounted |
| Low Lead Compliant | Yes |
| Made in America | Yes |
| MasterFinish | Brass Tones, Bronze Tones, Chromes, Nickel Tones |
| Material | Metal |
| Max Deck Thickness | 1.38 |
| Number Of Handles | 1 |
| Overall Height | 8.25 |
| Overall Width | 10.5 |
| Pre Rinse | No |
| Pullout Spray | Yes |
| Sidespray | No |
| Soap Dispenser Included | No |
| Spout Height | 6 |
| Spout Reach | 9.00 |
| Spout Swivel | 360 |
| Spout Type | Swivel |
| Sub Category | Pullout Spray Faucets |
| Theme | Traditional / Classic |
| Valve Type | Ceramic Disc |
| Width | 10.5 |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store