How far can the spout be pulled out of the base?
The K-13963 comes with a 33" pull out hose.

This product has additional required/recommended options. To configure, add to your cart.
The Elate Kitchen faucet by KOHLER meets the growing demand for pullout faucets with a sleek new design. Elate brings the sophisticated look of contemporary design at an affordable price.
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
The K-13963 comes with a 33" pull out hose.
The Kohler K-13963 is AB1953 compliant and it will fit with any standard faucet hole installation, usually about 1 3/4" to 2" in diameter.
The Kohler K-13963 has a 10 1/2" plate that can cover a three hole application.
The Kohler K-13963 Elate Kitchen Faucet, as well as all other Kohler Faucets available on our websites are Low Lead content compliant for both California's AB1953 and Vermont's ACT193 requirements. Kohler has taken a forward stance in understanding that these two regulations will lead to similar bills being enacted with the remaining 48 states and beyond.
The Kohler K-13963 is a solid cast brass.
The Kohler K-13963 has a rubber hose.
The Kohler K-13963 can be installed without the escutcheon. Please let us know if you have any other questions.
The Kohler K-13963 requires 3.61 inches of clearance for the handle.
The Kohler K-13963 can not be installed without the escutcheon plate.
There are a few different ones: the Kohler K-1893-C, the Kohler K-1895-C and the Kohler K-1995.
No unfortunately the Kohler K-13963 only comes with an escutcheon plate.
The spec sheets indicate this is a side lever only.
The total height of this faucet is 12.69" The spout height is 10.8.
The Kohler K-13963 sprayer is made from solid cast brass.
The Kohler K-13963 only comes with an escutcheon plate.
The Kohler K-13963 can only be mounted with the lever on the right side.
Yes, the spout on the Kohler K-13963 does swivel.
The Kohler K-13963 has a spout height of 10-7/8 inches, which is measured from the deck or countertop to the spout's outlet
| Faucet Holes | 1 |
|---|---|
| Handle Material | Metal |
| Spout Height | 10.875 |
| Sub Category | Pullout Spray Faucets |
| Faucet Centers | 0 |
| Height | 12.69 |
| Low Lead Compliant | Yes |
| Pre Rinse | No |
| Theme | Contemporary / Modern |
| Spout Reach | 9 |
| ADA | Yes |
| Category | Kitchen Faucets, Pullout Kitchen Faucets |
| Country Of Origin | USA |
| Max Deck Thickness | 2.5 |
| Spout Type | Fixed |
| Valve Type | Ceramic Disc |
| Made in America | Yes |
| Flow Rate (GPM) | 2.2 |
| Escutcheon Included | Yes |
| Filtering | No |
| Width | 10.5 |
| Eco Friendly | No |
| Material | Metal |
| Sidespray | No |
| Handles Included | Yes |
| Installation Type | Deck Mounted |
| Soap Dispenser Included | No |
| Pullout Spray | Yes |
| Handle Style | Lever |
| Number Of Handles | 1 |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store