If I already have a p-trap and the sinks are undermount in a cabinet, do I need either an angle supply or another p-trap?A. The Kohler K-2832 is compatible with any 1.25" P-trap or 3/8 NPT angle supply.
What is the minimum dimension between drawers in a vanity that the sink will fit in?A. The Kohler K-2832 suggests leaving 1.5 inches on each side, of sink. This item would need about 24 inches from left to right and 19 inches from front to back.
What is the depth of this sink?A. The Kohler K-2832 has a basin depth of 5.5"
How can the basin length/width be the same as the overall measurements?A. Since the sink tapers down and changes dimensions over the elevation the overall and basin area are measured from the top. The lip will roughly be an additional 1/8"
how much does the Garamond weigh? Does this require special support to mount?A. The Kohler K-2832 is 38 lbs in weight and should come with all necessary mounting hardware.
is this item covered in enamel or acrylic?A. The Kohler K-2832 is covered in enamel.
- The selected finish has been discontinued and is no longer available.
Save with Free Freight on ALL Kohler
Free Freight on ALL Kohler orders over $99. Few exclusions apply, US only
Offer Ends 10/31/2014
Buy the Kohler K-2832-47 in Almond at Build.com. Research Kohler K-2832-47 in Almond online. Find Kohler K-2832-47 in Almond features and specifications. Get the best deal by comparing the Kohler K-2832-47 in Almond today.