Modern MasterClean WaterTile Rain Shower Overhead Shower Head with 1/2 Inch Connection
this product should not have been released for manufacture in this state. the rough in head that the plumber has to make and mate to this unit has to be entirely to percise in tolerance. the rough in head should be a manufactured piece that the plumber attaches to the supply. each of the four heads are effected by the slightest offset in rough in and as anyone in plumbing will tell you rough in is exactly that rough. you need to reengineer this product.
May 8, 2010
A wonderful rain shower
I recently had to re do my bathroom (again because of a leak). I already had the rain tiles for my body jets and had the regular tile for my shower head. I decided to get rid of the shower head for the rain shower. What a great move. It is like being in a rain storm. My wife and I do not want to get out of the shower. It is heaven. My 3 kids 4, 6 and 8 also love to go under this. I actually shower them faster because it drenches them and gets them wet fast. I highly recommend this. I wish I put it in 3 years ago when I first did my bathroom.
December 25, 2009
Hard to install
The entire unit has to be dissasembled and reasembled inorder to install. As Sharkbite fittings are not allowed by local code they are not an option. I agree that Kohler should provide the manifold as part of the head with 1 connection point. I recommend this product because as long as you know what you are getting into you will get great results and a beautiful finish... just figure the extra time into the install!
December 13, 2011
worth the effort
the rain head is well built , nice finish, very functional. pay attention to detail on the install,ie the wall depth of the rough in. it comes with a template for the balancing loop,cut copper to fit and assemble on the template,when all looks good,disassemble clean all joints inside and out flux all joints assemble ,then you can solder all joints on the template at once ,cool and pressure check. the effort is worth it. I used a high flow valve 3/4 ", very effective thanks Kohler.
December 29, 2012
i really don't know why the other guy had a problem installing the unit. Change the plumber not the system. I am not a plumber and I had no problem installing the unit my self with shark bite. I don't think you guys read the instructions right or your plumber does not work with higher end units. Shower is great and looks as good as well.
September 22, 2011