I ordered this, but this did not come with a plug for the bathtub or other metal round piece smaller than the trim (decorative, I believe).
A. Those are sold separately and can be found on our website by searching for tub wastes.
Current fixtures are Coralais with K-15701-K valve, which appears to have been superseded by the K-304-K valve. Will the K-T10274-4 work with our current valve?
A. The Kohler K-T10274-4 does require the 304 valve.
Does this shower head pivot or is it fixed? Thanks.
A. The Kohler K-T10274-4 shower head is on a ball joint so it pivots slightly.
i have the model #r1920-4-bn for my bathtub and do not like the long spout can i purchase a shorter one just by itself
A. Tub spouts can be purchased individually. The tub spout for the K-T10274-4 is the K-10280-4.
The Kohler K-T10274-4 has a NPT connection while the K-T10275-4 has a slip fit connection. So, what does that mean? Which one should I buy?
A. The Kohler K-T10274-4 NPT is sweated to the pipe, whereas the slip fit has a set screw on the underside of the spout.
What is the difference between the K-T10274-4 and the K-T10274-4A?
A. The Kohler K-T10274-4 has a Sculpted handle style, whereas the -4A has the Traditional handle style, which is less contemporary.
Can this be used with the K-304 PX valve?
A. Yes the Kohler K-T10274-4 can be used with the K-304 PX valve
Do I have to order this specific Kohler rough in valve for this fixture -- or is it something a plumber can configure on site?
A. The Kohler K-T10274-4 requires a specific rough-in valve to function. You can choose either the k-304-k or the k-304-ks, the only difference being the service stops on the ks model.
Does this Kohler Forte shower system come with a drain cover and an overflow/ lever?
A. The Kohler K-T10274-4 does not come with drain cover, nor the overflow lever plate. Those will need to be ordered separately depending on the tub waste used with your bath tub.
Can you see the screws on the handle that turns the water on?
A. No, you cannot see the screws on the Kohler K-T10274-4.
I need a faucet like this but with a 14 gallon per minute cspacity. Do you have one like that?
A. Kohler offers the k-2971 which is a High Flow valve allowing 13GPM.
Is there a longer spout available?? Will another fit onto it??
A. The Kohler K-T10274-4 is only available with it's 5.25" diverter tub spout. The K-T10276-4 can be purchased with a separate diverter tub spout, however. Though, the Kohler diverter tub spout with the furthest spout reach we could find is the K-10589, which is 5.75" out.
What's the difference between the Kohler K-T10275-4 and K-T10274-4?
A. The Kohler K-T10274-4 has a NPT connection while the K-T10275-4 has a slip fit connection.
What is the flow rate at the tub spout at 40 PSI?
A. The Kohler K-T10274-4 flow rate will be based on the valve, which is 45 psi, and 5 gpm. 40 PSI would get you about 4.5 gpm.
Is the lever trim plastic or metal?
The Kohler K-T10274-4 trim is made of metal.
Buy the Kohler K-T10274-4-BN in Brushed Nickel at Build.com. Research Kohler K-T10274-4-BN in Brushed Nickel online. Find Kohler K-T10274-4-BN in Brushed Nickel features and specifications. Get the best deal by comparing the Kohler K-T10274-4-BN in Brushed Nickel today.