Kohler 400 Amp Service Entrance Automatic Transfer Switch for use with 30RESA, 38RCL and 48RCL generators less Load Center

400 Amp Service Entrance Automatic Transfer Switch for use with 30RESA, 38RCL and 48RCL generators less Load Center

The transfer switch is the brain of your Kohler home backup power system. It continuously monitors the utility power for an interruption. If utility power fails, the transfer switch automatically starts the power system, transfers the electrical loads and restores power to your home. When utility power resumes, the transfer switch reverses the process again, automatically.

Kohler RDT-CFNC-400ASE Features:

• Automatically and safely transfers power to and from utility to generator
• Compatible with Kohler Models 30RESA, 38RCL and 48RCL Generators
• User-friendly interface with easy-to-read international symbols
• Aluminum, NEMA 3R outdoor enclosure features corrosion-resistant padlockable enclosure to withstand harsh environments
• Signals generator to start via contact closure and allows for 5 minute delay in startup of selected loads
• Two-pole, single-phase open-transition transfer switch
• Contactor electrically and mechanically interlocked
• Double throw inherently interlocked design
• Solid neutral
• Contactor manually operable for maintenance purposes
• Silver alloy main contacts
• 100% equipment rated and can be applied at the rated current without derating
• Approved for indoor or outdoor installation
• Service disconnect circuit breaker on the normal (utility) source (80% rated)
• Circuit breaker for generator set battery charger
• Circuit breaker for engine heater
• Auxiliary position-indicating contacts
• Extraordinary reliability – 5-year/2000-hour warranty

Control Features:

• User-friendly interface with easy-to-read international symbols
• Source available and contactor position indicators
• LED indication of system faults:
  • Failure to acquire standby source
  • Failure to transfer
  • Auxiliary switch fault
• Common fault contact: latches closed on system faults
• Engine start contact: provides contact closure to start the generator set
• Test button (with or without load)
• Single-phase voltage sensing on both sources, ±5%
• Line-to-line frequency sensing, ±2%
• Fixed time delays

Kohler RDT-CFNC-400ASE Specifications

• Overall Dimensions: 42"H x 22"W
• Voltage: 240
• Amp Rating: 400