Item # bci2130485
Item # bci2130485
Little Giant 1 HP 160 GPM 230V Manual Submersible Sewage Ejector Pump
Model:514620
Details
1 HP 160 GPM 230V Manual Submersible Sewage Ejector Pump
The Eliminator(R) submersible pump series from Little Giant is specifically engineered to handle the tough, demanding tasks of effluent and sewage waste transfer with high efficiency and long term dependability. For use in residential, commercial, industrial and agricultural applications with light to medium transfer demands. Applications include dewatering, effluent waste, wastewater and sewage handling where such materials must be moved upward from a collection area to sewer or septic lines, or drainage areas.
- 1 HP permanent split capacitor motor with overload protection (single phase models)
- Designed for continuous duty
- 20 foot power cord without plug
- Epoxy coated cast iron housing, cover and volute
- 3" FNPT (76 mm) discharge
- Carbon/ceramic shaft seal
- Two vane non-clog epoxy coated cast iron impeller
- Upper and lower ball bearings
Dimensions and Measurements
Cord Length | 240 in. |
Depth | 9.89 in. |
Discharge Diameter | 3 in. |
Flow Rate by Feet of Head | 100 gal / 20 ft, 40 gal / 30 ft, 160 gal / 10 ft |
Height | 17.2 in. |
Length | 14.1 in. |
Maximum Diameter Solids | 2 in. |
Maximum Head Height | 35 in. |
Minimum Head Height | 10 in. |
Product Weight | 94 lbs. |
Shut Off Height | 35 in. |
Shut Off Pressure | 15.1 |
Water Connection | 2" |
Water Pressure (Max) | 15.1 PSI |
Width | 9.9 in. |
Dimensions and Measurements
Cord Length | 240 in. |
Depth | 9.89 in. |
Discharge Diameter | 3 in. |
Flow Rate by Feet of Head | 100 gal / 20 ft, 40 gal / 30 ft, 160 gal / 10 ft |
Height | 17.2 in. |
Length | 14.1 in. |
Maximum Diameter Solids | 2 in. |
Maximum Head Height | 35 in. |
Minimum Head Height | 10 in. |
Product Weight | 94 lbs. |
Shut Off Height | 35 in. |
Shut Off Pressure | 15.1 |
Water Connection | 2" |
Water Pressure (Max) | 15.1 PSI |
Width | 9.9 in. |
Characteristics and Features
Automatic | No |
Configuration | Submersible Pump |
Impeller Material | Cast Iron |
Material | Cast Iron |
Material Casing | Iron |
Material Housing | Iron |
Shutoff Head in Feet | 35 |
Submersible | Yes |
Switch Type | Manual |
Water Connection Type | NPT |
Characteristics and Features
Automatic | No |
Configuration | Submersible Pump |
Impeller Material | Cast Iron |
Material | Cast Iron |
Material Casing | Iron |
Material Housing | Iron |
Shutoff Head in Feet | 35 |
Submersible | Yes |
Switch Type | Manual |
Water Connection Type | NPT |
Electrical and Operational Information
Amperage | 11 |
Electrical Phases | 1 |
Frequency | 60 Hertz |
Horsepower | 1 |
Maximum Fluid Temperature | 140 °F |
Voltage | 230 |
Wattage | 1900 |
Electrical and Operational Information
Amperage | 11 |
Electrical Phases | 1 |
Frequency | 60 Hertz |
Horsepower | 1 |
Maximum Fluid Temperature | 140 °F |
Voltage | 230 |
Wattage | 1900 |
Warranty and Product Information
Approved for Commercial Use | Yes |
Certifications | UL, CSA |
Warranty and Product Information
Approved for Commercial Use | Yes |
Certifications | UL, CSA |