M18 Fuel 2 Speed Cordless 1/2" Drill/Driver Kit with 650 Torque and Compact Battery Packs
With up to 650 in lbs of torque, the M18 FUEL™ Drill Driver is the most powerful drill in its class. The new Milwaukee designed and built POWERSTATE™ Brushless Motor provides unmatched power and sustained torque to complete the toughest of applications. The POWERSTATE™ Brushless Motor outperforms all leading competitors and delivers up to 10X longer motor life for maximum durability. Powered by the most durable battery pack on the market – REDLITHIUM™, the M18 FUEL™ Drill Driver delivers up to 50% more run-time than the competition. The M18™ REDLITHIUM™ batteries provide longer battery life, with over 5X more recharges than leading competitors. A battery fuel gauge displays remaining charge for less down time on the job. The M18 FUEL™ Drill Driver contains the most advanced electronic system on the market, with REDLINK PLUS™ intelligence. REDLINK PLUS™ electronics provide total system communication with overload protection. The M18 FUEL™ Drill Driver comes with the new multi-voltage charger, so you can charge all M12™ and M18™ batteries with one charger. A new contoured soft grip gives users the ultimate comfort during prolonged use. The M18 FUEL™ Drill Driver comes with an all metal ratcheting locking chuck for maximum grip, bit retention and durability. Tool features an LED light, and is compatible with REDLITHIUM™ compact and XC battery packs.
Milwaukee M18 FUEL™. A New Breed of Cordless Tool. Utilizing the Most Advanced Technologies in the World, FUEL™ Delivers Unrivaled Performance in a Compact Structure. Built for the Most Demanding Professionals in the World.
Milwaukee 2603-22CT Features:
POWERSTATE™ Brushless Motor: Delivers up to 650 in lbs of torque with maximum sustained torque to complete the toughest of applications
REDLITHIUM™ Battery Technology: Superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the market
REDLINK PLUS™ Intelligence: The most advanced system of cordless power tool electronics. Provides optimized performance and overload protection using total system communication between tool, battery and charger
Milwaukee 2603-22CT Specifications:
Torque: 650 in-lbs
Speed: 2 Speed
RPM: 0-550 / 0-1,850 RPM
Chuck Type: 1/2" Metal Single Sleeve - Ratcheting Lock
This product is listed under the following manufacturer number(s):
Milwaukee 2603-22CT NA
*Denotes a finish or option that has been discontinued
Milwaukee M18 Cordless Promo
Milwaukee shows off their M18 cordless power tools
Quick Tip - Catching Your Drill Shavings
This tip will make clean up much easier.
Installation Resource Center
Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.
Milwaukee 2603-22CT Reviews
Rated 4 out of
Where is the bit holder and belt hook??I just bought the new brushless M18 to replace my older cordless version which still works great but the batteries are fading.
Date published: 2013-07-13
Rated 5 out of
very stout, yet nimble and versatile90% of my use is light duty, "around the house" stuff. I wanted something that was small and light for such. Occasionally, I have a "heavier duty" project that needs POWER (torque) (like drilling 2" tapcons into cement)...without being unwieldy with the little stuff. This is the perfect match. Small, light (OMG, others are HEAVY), and 650 inch lbs of torque. I don't need a lighter duty 12 volt because this covers everything. I've been out of the market for about a decade or so...did MUCH research amongst major manufacturers and kept coming back to Milwaukee...
Date published: 2013-06-02
Rated 5 out of
Hands Down...The Best Drill I've Owned!I've been wanting this drill in the worst way ever since I received an email from Milwaukee announcing it's availability. Milwaukee quality, 18 volt FUEL, Brushless motor, and 2 Li-Ion batteries...Sounds like a wish list. When this drill arrived, I was not disappointed. The fit, finish, and quality were visibly apparent. When I picked up the drill I was amazed at how well it felt in my hand. It had an outstanding balance, and felt as if the grip was molded for my hand. Switch placement was dead-on for ease of forward / reverse selection. Running through the clutch settings and Hi / Low speed's produced a smooth, yet continuous fluctuation in speeds. With the motor being brushless, the sound this drill makes is very unique, unlike all the other drills I've owned. There is absolutely no motor strain or high-pitched whine witnessed, even after driving about a dozen 3" outdoor screws in a project I was finishing up. This drill simply didn't skip a beat. The batteries are remarkable. After driving all those screws into pressure treated 2x6's, the battery indicated only one bar of charge used. I easily would have changed batteries at least once using my old Li-Ion's in my other drill. It appears the M18 FUEL speaks for itself. I love the fact that Milwaukee had the foresight of the charger being of dual use. This way, I can take the batteries from my Milwaukee 12 volt and charge them along with these using the same charger, thus eliminating yet another battery charger laying around. Nice touch. There is absolutely nothing I don't like about this drill...It is easily the best drill I've ever owned. I am thrilled with it, and know that this beast of a drill will long be a productive asset within my tool arsenal.
Date published: 2013-05-20
Rated 5 out of
Snow Cap from
Excellent Cordless Drill!!!Don't take this drill if you plan on blaming the cordless drill for not having enough power to get it done. Because you won't have that option with this drill, it can do it, really! This one is the real deal, I made approximately 40 drill holes through heavy dense wet treated wood, thickness of one 4x6 going after the 6 thick side (I used a twist bit, should have used my flat wood bit but it seemed to have walked off), the drill had no problem with the task. Then I used it to drive 4 inch screws in, again no problem, very impressed by the power of this cordless drill. I've used many cordless drills over the time; in fact this was an upgrade from a decent Hitachi 14.4 model. But this one really surprised me, in the past all the cordless drills I had were okay but never kept up to a wired 120 volt unit. This one even outperformed my trusted, never fail, and never bog down 120 volt drills. In fact I went back and re drove the screws in further from when I had used what I thought was my powerful 120 volt corded hammer drill. This Milwaukie cordless drill drove them in even deeper ?..Whoa that wasn't supposed to happen, but it did and I became a believer of this drill. With the load I was doing I completely drained the battery; put it on the charger and back to full life in less than 30 minutes for that battery, again whoa! Once piece of advice, get a real screw bit holder, I bought some piece of junk at Lowes, it wobbled, barely sits in. So get something real that is at the same level of this drill. You don't want anything to cause your experience with this drill to be less than perfect. It's an amazing tool and get the full experience out of it. It would be kind of like buying a Ferrari and putting retread tires on it. Defiantly recommend, in fact I have already starting telling my friends about this drill.
Date published: 2013-05-20
Rated 5 out of
the steel worker from
we asked for better they made it happenI bought this drill about 4 weeks ago since then every day I drill 1" unibit holes in the frames of international chasis this is heavy duty work in a professional setting never before have I seen a battery drill preform as well as this one I am very certain I will never need another drill.
Date published: 2013-04-12
Rated 5 out of
Good things come in small packages4 weeks ago I got hold of a Milwaukee M18 CPD-32C, and have been testing it ever since. The first thing I noticed is the compact sized case, in comparison to all my V28 cases which are probably a little too big. As you can see from my pictu re I have quite a few Milwaukee power tools, all the cordless stuff is either ancient 12v Ni-cad or V28 beasts, and also not pictured I have 2 bigger hammer drills. I thought cordless drills couldn't get close to my V28's performance and quality; well it seems that technology has moved on. The light weight M18 feels so very well made and designed, with a lot of nice new features. Such as; the built-in clip, the light and the dedicated screwdriver setting. It's good to see the metal chuck has been retained, unlike other 'premium' brands which have gone plastic. The detachable handle is a very nice improvement on the V28 one, very sturdy and robust. Delivering very nearly the same torque as the V28, from only 2/3 of the voltage is impressive stuff, I gave the hammer function a go drilling some holes in masonry, which normally I'd use the V28 for, or even the big corded drill. It managed very well and didn't struggle or stall. In my day job I'm an engineer, and thought I'd use the M18 on some precision metalwork, needless to say the results were flawless. Drilling 20mm holes through thick metal plate would be too much to ask of most other cordless drills. The variable speed trigger switch is nicely controllable too, even at very low speed. On to my next project, some woodwork; The M18 has that extra power for driving in screw after screw where the M12 would struggle, it's light enough to carry on working for hours where the V28 would be making my arm ache due to the weight! I'm also impressed with the small form charger, and its ability to charge M12 too. Shame I just bought a M12 charger a month before. To wrap up, I'm very pleased with this new tool & would recommend it highly? I just need to save up for the circular saw next.
Date published: 2013-02-19
Rated 5 out of
Excellent Reno ToolI bought this drill when I was resheathing my roof for shingles. It worked nice and smooth all day long. It feels good in your hand and has lots of power. The variable speed works really well too. A week later I was doing drywall repair and had no problem tightening down the screws without piercing the paper. Another great Milwaukee tool.
Date published: 2012-10-19
Rated 5 out of
Best coardless Drill I ownI use this drill to drill holes from 1/8" to 3/4" in concreate wood or metal. It has plenty of power to do what ever I need it to do. It dosent heat up as quickly as my other 1/2" drill If your a professional i would recommend the drill with the larger battery pack. Getting more done means more $
The cost to ship items varies by item, shipment and shipping option.
Free Ground Shipping on Orders Over $49 *
Standard ground shipping transit time is 5-7 business days.
Free Freight Shipping on Orders Over $1500 *
Curb side delivery (also called freight or "LTL" shipping) is reserved for large, heavy, or oversized items like chandeliers, bathtubs, shower doors, etc. Items are palletized and loaded onto a large truck for shipment, and delivered to your curb by scheduled appointment. Transit time is 7-10 business days.
* For exact shipping costs, add the product(s) to your cart and enter your zip code. All offers pertain to the lower 48 states and do not include deliveries to Alaska, Hawaii or Canada.