What is the length of this fixture?
The Minka Lavery ML 1011-PL is 48 inches in length by 6.75 inches wide.

The Garage, Closet, and Laundry Rooms are only a few of the areas where the utility light can save money and provide the essential performance of general light required in these work rooms. Low operating costs and efficient light output make the utility light a value in any home
Featuring: Clear Acrylic
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
The Minka Lavery ML 1011-PL is 48 inches in length by 6.75 inches wide.
The Minka Lavery ML 1011-PL takes 2 32W G13 T-8 Bulbs so it has a maximum wattage of 64W.
The Minka Lavery ML 1011-PL - T8 is a 1" diameter tube, the older T12 tubes are 1.25" There isn't much savings in wattage/power but certian states and areas require T8 tubes. Look at the individual bulb, the wattage is the amount of power which will vary between bulbs and fixtures.
The Minka Lavery ML 1011-PL uses approximately .6 an amp per unit. So essentially you could set up 33 of these units on a 20 amp breaker. Per manufacturer they recommend to leave 10% of your amerage not located to units. So I would recommend that you could safely install 30 of these units to a 20 amp breaker.
The Minka Lavery ML 1011-PL Ceiling Fixture is not available with a pull chain instead of a switch.
The Minka Lavery ML 1011-PL is hardwired, so it must be connected to a wall switch.
| Bulb Base | Fluorescent Pin |
|---|---|
| Number of Bulbs | 2 |
| Height | 2.5 |
| Light Direction | Down Lighting |
| Theme | Functional |
| Width | 6.75 |
| Eco Friendly | Yes |
| Wattage | 64 |
| Category | Sale |
| Installation Type | Flush Mount |
| Energy Star | Yes |
| Bulb Type | Fluorescent |
| Watts Per Bulb | 32 |
| Length | 48 |
| Suggested Room Fit | Kitchen |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store