This product has additional required/recommended options. To configure, add to your cart.
Down Rods Recommended
Decorate with the alternative - The Bolo Fan. Minka Aire's best selling finishes accent this fan, creating a decorative alternative to an everyday need. The Bolo Collection conveys grandeur and elegance that distinguishes exquisite craftsmanship in design.
Features:
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
The MinkaAire Bolo will each come with a remote control that will be connected directly to that certain fan. You should not have a problem with mix signals.
The MinkaAire Bolo would use the A180 low ceiling adapter.
The MinkaAire Bolo comes with the RC213 which is a hand held remote. The receiver is in the fan. WC106 is a direct wire and doesn't use a receiver. The WC213 will work with the receiver that comes with the MinkaAire Bolo.
Thanks for your question. The MinkaAire Bolo can be used with just the wall switch or hand held remote. Let me know if you need anything else.
The MinkaAire Bolo does not have a pull switch, it does include a Hand Held Wall Mount Remote Control.
The MinkaAire Bolo has a Hand Held Wall Mount Remote Control (Model# RC213) (Included)
The downrod that can be used with the MinkaAire Bolo is the DR524.
The MinkaAire Bolo puts out a good amount of light as it uses three bulbs.
The MinkaAire RC213 does not have that option, you would need the RC212.
The MinkaAire Bolo has 3 speeds: low, medium and high.
The MinkaAire Bolo has a scavo glass light kit.
This item can be flush mounted with the addition of the low ceiling adapter, item #A720. The overall height would then be 17"
The MinkaAire Bolo has 2200 CFM on Low, 3700 CFM on Medium, and 5700 CFM on High.
A low ceiling adapter is an adapter that allows a fan to be mounted closer to the ceiling if you have low ceilings in your home.
The included downrod will be fine for a 9' ceiling; you would want to consider the low ceiling adaptor if you had an 8' or lower ceiling.
The MinkaAire Bolo is compatible with a RC213 remote control and the WC213 ceiling fan wall control. If you are still having issues with the fan, please call our customer service line to help establish if it is in need of replacement parts.
The MinkaAire Bolo can be installed with or without the light.
Yes, the MinkaAire Bolo can be mounted on a sloped ceiling up to 30 degrees.
The MinkaAire Bolo remote RC213 does have full dimming capability.
The MinkaAire Bolo is 20" height when used with 3.5" included downrod. This is the lowest it can be hung.
The MinkaAire Bolo is too large for a room that size unless you have high ceilings (10' or higher).
The MinkaAire Bolo takes a max wattage of 60 per bulb.
The MinkaAire Bolo features blades made of ABS plastic.
A MinkaAire down rod will be necessary when using the MinkaAire Bolo fan.
For the Minka Aire Bolo 5 Blade 52" Ceiling Fan use are able to use both the wall control and remote control to control this fan at the same time.
The MinkaAire Bolo uses 3 60w Candelabra Base Bulbs which should be a fair amount of light for a standard size room.
The MinkaAire Bolo can be installed without the light kit, and includes a cap to cover the fitter.
The MinkaAire Bolo canopy diameter is 7 3/8".
| Blade Pitch | 14 |
|---|---|
| Blade Span | 52 |
| CFM | 5700 |
| Collection | Transitional |
| Controller Included | Yes |
| Downrod Size(s) | 3.5, 6 |
| Downrod(s) Included | Yes |
| Energy Star | Yes |
| Finish Application | Brushed |
| Flush Mounting | No |
| Height | 16.5, 20 |
| Light Direction | Down Lighting |
| Light Kit Compatible | Yes |
| Light Kit Included | Yes |
| Motor Size | 172 x 17 |
| No Load RPM | 170/70 |
| Number of Blades | 5 |
| Number of Bulbs | 3 |
| Suggested Room Fit | Bedroom |
| Theme | Traditional / Classic |
| UL Listed | Yes |
| UL Rating | Dry Location |
| Wattage | 180 |
| Watts Per Bulb | 60 |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store
