Can this fan be used on a sloped ceiling?
This item can mount on a sloped ceiling up to 45 degrees with the sloped ceiling adapter, item # A245.

This product has additional required/recommended options. To configure, add to your cart.
As the name implies, "a taste of things to come," simple in style, yet ingenious by design, the Concept requires 75% less time and labor to assemble than conventional ceiling fans.
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
This item can mount on a sloped ceiling up to 45 degrees with the sloped ceiling adapter, item # A245.
The MinkaAire Concept I 44 comes with a dimmer. It's recommended you use the one that comes with it. I hope this helps.
The MinkaAire Concept I 44 comes with a cover if you do not want to use the light. The fan is good to use on a slanted ceiling and will work for that size room.
Thank you for your question. The MinkaAire Concept I 44's glass shade is removable, allowing you to install new bulbs.
The MinkaAire Concept I 44 comes with a 3-1/2 and 6 inch down rod. When using both down rods it'll be 15-1/2 inches and with just using the 3-1/2 down rod it's 9-1/2 inches.
Just order the 18" downrod, MA DR518.
This fan will be fine for your slope, you do not need the slope adapter.
This fan can mount on a sloped ceiling up to 45 degrees with the addition of the sloped ceiling adapter, item # A245. There is not a 10" rod but there is a 12" available.
The MinkaAire Concept I 44 cannot take or be modified into using an incandescent bulb because the fitter on the light kit will only take a halogen bulb.
The remote that comes with the MinkaAire Concept I 44 will control the lighting and fan speed.
The MinkaAire Concept I 44 uses a 100 watt halogen bulb. Unfortunately there are no other shade or light bulb options available for this fan.
The MinkaAire Concept I 44 comes with the handheld remote so you would need to purchase the WC212 if you want a wall mount control, but you can use both.
With a 3 1/2" down rod, the MinkaAire Concept I 44 is 15 1/2" in height. This would leave 6 foot 8 1/2" from bottom of fan to floor.
The MinkaAire Concept I 44 can be run on a switch. It would be the WC212.
The MinkaAire Concept I 44 which comes with the RC212 does come with the wall holster.
In order to reverse the direction of the MinkaAire Concept I 44 you would need to use either the remote that comes with the fan or the wall control which is sold separately under model number WC212. Both the remote and the wall control have a reverse switch. There is not a chain or a pull on the actual fan that would be used to reverse the direction of the fan.
The MinkaAire Concept I 44 will work with any MinkaAire universal remote control and receiver. Any electrician can install this for you
Yes, the MinkaAire Concept I 44 is compatible with a remote. It comes with the RC220 hand held remote control.
The MinkaAire Concept I 44 ceiling mount diameter is 5 7/8". The body base 9 7/8".
The MinkaAire Concept I 44 could be perfect for a room that size.
The MinkaAire Concept I 44 can be used with additional downrods ranging from 12", 18", 24", 48" and 72". When you add the fan to your cart the next page will prompt you to select a larger downrod if you need one.
Its 2 wire, but it comes with a remote, not a wall control.
The MinkaAire Concept I 44 can use the wall remote and the hand held remote.
The MinkaAire Concept I 44 will need a sloped ceiling adapter for a 15 degree slope. The sloped ceiling adapter is part number A245.
The Minka Aire Concept I 44 with three blades is just as effective as a five blade fan. It has a CFM (cubic feet per minute) rating of 2600, comparable to five blade fans of the same size.
The MinkaAire Concept I 44 must be used with the down rod at 3.5" minimum.
| Blade Pitch | 14 |
|---|---|
| Blade Span | 44 |
| Bulbs Included | Yes |
| CFM | 4600 |
| Collection | Concept |
| Controller Included | Yes |
| Downrod Size(s) | 3.5, 6 |
| Downrod(s) Included | Yes |
| Energy Star | Yes |
| Fan Type | Industrial |
| Finish Application | Brushed, Polished |
| Flush Mounting | No |
| Height | 12 |
| Light Direction | Down Lighting |
| Light Kit Compatible | Yes |
| Light Kit Included | Yes |
| Motor Size | 153 x 15 |
| No Load RPM | 190/80 |
| Number of Blades | 3 |
| Number of Bulbs | 1 |
| Suggested Room Fit | Kitchen Nook |
| Theme | Modern |
| UL Listed | Yes |
| UL Rating | Dry Location |
| Wattage | 100 |
| Watts Per Bulb | 100 |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store