What color is the light on the oil rubbed bronze fan?
The color of the glass on the MinkaAire Concept II 44 in the Oil Rubbed Bronze is white, even though the picture shows it finished over as well as the rest of the fan.

The Concept 42 Collection conveys grandeur and elegance that distinguishes exquisite craftsmanship in design. See why it's our top selling fan year in and year out!
Details:
Light Kit (Included):
3 Blades:
Fan Includes:
Energy Information, Excludes Light:
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
The color of the glass on the MinkaAire Concept II 44 in the Oil Rubbed Bronze is white, even though the picture shows it finished over as well as the rest of the fan.
The MinkaAire Concept II 44 is 10.5" without light kit and the light kit that goes with this fan is 4.5" high so together they would have an overall heigth of 15"
The MinkaAire Concept II 44 requires a 100w Mini-Can Halogen bulb.
The MinkaAire Concept II 44 has a 10.5" drop as you see it in the picture.
The MinkaAire Concept II 44 comes with the light kit included.
You have to have separate controllers for each fan. The MinkaAire Concept II 44 has the RC212 control.
These two functions can operate independently.
Yes, the MinkaAire Concept II 44 can be hung on a sloped ceiling.
This fan is not designed for use in wet locations. Bathrooms, due to the steam, are considered a wet location. An outdoor ceiling fan would be an acceptable option in a bathroom as they are approved for use in wet/damp locations.
The MinkaAire Concept II 44 includes all items needed for installation.
The MinkaAire Concept II 44 is UL listed as indoor dry location and would not be appropriate for outdoor use.
From the top to the very bottom of the glass is 11". From the top to bottom of the blades is 10.5".
The MinkaAire Concept II 44 blades measure 19" and the total span from one end to the other is 44".
A 100w bulb is the max this fixture will take.
The MinkaAire Concept II 44 can be hard wired to MinkaAire WC212 Wall Mounted Remote Control System for MinkaAire Ceiling Fans
The MinkaAire Concept II 44 is recommended for dry locations and unless the porch is able to protect it against all moisture it would not be suitable for the porch.
The remote has different settings, low, medium and high, but no timer.
The MinkaAire Concept II 44 doesn't have a timer.
If your control is not working it could be a couple of reasons. It is either a bad control, or a electrical issue, or even can be a bad fan motor. You will want to contact Minka at 1 (951) 735-9220 and ask for their technical department. They can help assist you to troubleshoot to find the root of the problem.
The height from the ceiling to the top of the blades is 10 1/2". THe over all height is 11 11/2 which is from the ceiling to the bottom of the fan.
The MinkaAire Concept II 44 only comes lamped for a 100w Mini-Can Halogen bulb
The MinkaAire Concept II 44 uses 120 volt bulbs and comes with a handheld remote with dimmer function but it is compatible with a a standard dimmer.
The MinkaAire Concept II 44 is rated for dry locations, indoor use only.
The MinkaAire Concept II 44 is only 10.5" without the light kit so this would work on any height ceiling.
The MinkaAire Concept II 44 is made in China.
The base of the MinkaAire Concept II 44 fan where it connects to the ceiling is 10" in diameter.
Replacement glass for the MinkaAire Concept II 44 ceiling fan is MinkaAire GF516.
Thank you for your question. I would recommend finding a unit that is listed for outdoor use. Just the moisture in the air could have an effect on this unit down the road.
The MinkaAire Concept II 44 shade is a twist on shade. By placing your hands on the glass after the light is off you do a 1/4 twist counter clockwise and the shade will release from the housing After which it is a standard threaded bulb inside.
The MinkaAire Concept II 44 (and all other Minka fans that have light kits) must work on separate remotes. These fans are self-learning and will simply have to be trained to their separate remotes at the time of installation.
We do sell accessories. You may want to look at the MinkaAire RC223.
The MinkaAire Concept II 44 includes a light cap if you do not want to use the light. If you are on our website, the additional images show you exactly what the fan would look like with the cap installed.
The MinkaAire Concept II 44 will have a switch on the main unit to reverse the air flow.
The MinkaAire Concept II 44 unfortunately does not have an uplight kit.
The MinkaAire Concept II 44 takes a 100 watt mini can halogen light bulb.
Assuming I understand what you mean, kill the power to one, set the settings, then do the same to the other. I hope this helps. Please contact me directly to place an order.
The MinkaAire Concept II 44 comes with the RC212 hand remote and a receiver with the fan. If you would like a wall control you can purchase the WC212.
You can use the MinkaAire WC212 with the MinkaAire Concept II 44.
The MinkaAire Concept II 44 blades would be approximately 10.5" away from the ceiling.
The MinkaAire Concept II 44 comes with the RC212 that has a receiver. That receiver can be used for the WC212.
The recommended wall switch for the MinkaAire Concept II 44" ceiling fan is the MinkaAire WC212.
The blades are made of plastic and the housing is made of metal.
The MinkaAire Concept II 44 measures 10.5" in height either with or without the light kit. Unfortunately Minka Aire does not provide the measurement for the blades themselves, however once could assume each would measure approximately 14" (44" diameter/2 minus 8" for width of light kit).
Thanks for your question. The MinkaAire Concept II 44 ships in a box that is 24-3/8" x 13-1/2 x 13".
Based on the manufacturers specification sheet the MinkaAire Concept II 44 comes with a hand held remote.
The MinkaAire Concept II 44 flushmount ceiling fan has a weight of 26 LBS and has three fan speeds: high, medium, and low.
The MinkaAire Concept II 44 replacement glass is part # GF516A.
The MinkaAire Concept II comes in 44" and 52". The MinkAire Spacesaver 3 is 26"
The MinkaAire Concept II 44 is CSA compliant.
| Blade Pitch | 14 |
|---|---|
| Blade Span | 44 |
| Bulbs Included | Yes |
| CFM | 4600 |
| CFM (High) | 4600 |
| Category | Modern Lighting, Top Rated |
| Collection | Concept |
| Controller Included | Yes |
| Energy Star | No |
| Finish Application | Brushed, Polished |
| Flush Mounting | Yes |
| Height | 10.5 |
| Light Direction | Down Lighting |
| Light Kit Compatible | Yes |
| Light Kit Included | Yes |
| MasterFinish | Bronze Tones, Nickel Tones, Whites |
| Motor Size | 153 x 15 |
| No Load RPM | 184/86 |
| Number of Blades | 3 |
| Number of Bulbs | 1 |
| Suggested Room Fit | Bedroom, Dining Room, Family Room, Game Room, Great Room, Kitchen Nook, Living Room, Office, Studio |
| Theme | Modern |
| UL Listed | Yes |
| UL Rating | Dry Location |
| Watts Per Bulb | 100 |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store