Can the Moen T2133 be used to replace a generic faucet of unknown brand. We are not replacing tile so we can not change out interior fittings.
In order for the faucet to work properly you will need the accompaning rough in valve.

This product has additional required/recommended options. To configure, add to your cart.
Product Features:
Product Technologies / Benefits:
Valve Inlet Connections:

Valve Trim Specifications:
Shower Head Specifications:
Tub Spout Specifications:
Variations:
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
In order for the faucet to work properly you will need the accompaning rough in valve.
To replace the shower head with the 52715, the entire piece, the shower arm, shower head, and flange will have to be removed and the wall supply elbow of the 52715 would be plumbed to the piping.
The Moen T2133 uses the 2510 for IPS and the 2520 for CXC connections.
The Moen T2133 is a low flow shower head at 2.5 GPM. If you have any other questions please call 800-375-3403 x725 for Jordan. I hope this helps.
Any Moen tub waste would match their brushed nickel. Here are a couple examples 90480 and 90410. You can go with another manufacturers Brushed Nickel but I can not gaurentee that it will match perfectly. Brushed Nickel is however a finish that is fairly the same with all manufacturers. Please let us know if you have any other questions.
The Moen Eva collection does not offer an in-wall diverter to go with the system. This means you'll need to use a shower arm diverter such as the model A720. However, this will not allow you to operate both functions at once. I hope this helps!
The Moen T2133 does not include the tub waste.
The Moen T2133 uses a slip fit spout connection.
The Moen T2133 can replace the chateau if it has a posi-temp valve.
Posi-Temp is a marketing name for Moen's temperature control for their shower faucets and it refers to their models that simply rotate in order for you to adjust the temperature of the water. It does include: A pressure-balanced system that maintains water temperature within ±3°F, built-in temperature limit stops which allow you to control how far the handle rotates, therefore, controlling the range of water temperature, and meets pressure-balancing safety codes.
The Moen T2133 will use the 62360 in the case of a PEX application.
The Moen T2133 will work with the trim kits that are Moentrol trims. Trims like the T3112 or the T2606.
All of the products we sell come with their full-factory manufacturer warranty. Each product page has information about the manufacturer warranty and its terms. The warranty information can be found under additional links on the product page. Our company offers a warranty on all products shipped. If the item is found to be defective prior to installation, just set up a return with in 60 days of receiving the item(s) and we will gladly take care of the return. In the case where defective merchandise is found after installation, a warranty claim must be filed with the manufacturer and may be covered under the manufacturers warranty.
| Spray Pattern | Full |
|---|---|
| Faucet Holes | 3 |
| Handle Material | Metal |
| Diverter Included | No |
| Showerhead | Single Function |
| WaterSense Certified | No |
| Mounting Type | Wall Mounted |
| ADA | Yes |
| Spout Reach | 7 |
| Theme | Modern |
| Showerhead Flow Rate | 2.5 |
| Slide Bar Included | No |
| Wall Supply Included | Yes |
| Scald Guard | Yes |
| Connection Size | 0.5 |
| Number Of Bodysprays | 0 |
| Valve Included | No |
| Pressure Balanced | Yes |
| Valve Type | Pressure Balanced |
| Cartridge Technology | M-PACT Common Valve |
| Escutcheon Included | Yes |
| Bodysprays Included | No |
| Flow Rate (GPM) | 2.5 |
| Spray Settings | 1 |
| Handshower Included | No |
| Approved for Commercial Use | Yes |
| Escutcheon Height | 7.5 |
| Material | Metal |
| Handles Included | Yes |
| Installation Type | Wall Mounted |
| Handle Style | Lever |
| Showerhead Width | 3.5 |
| Drain Assembly Included | No |
| Number Of Handles | 1 |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store