Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.
NuTone 665RP Reviews
Rated 2 out of
no wayOur electrician installed this model yesterday and I am insisting that he replace it--it makes a very, very loud noise when you turn on the heat fan and seems to put out little heat.
Date published: 2013-01-18
Rated 1 out of
10 secondsI just had a licensed electrition install this fan and then we turned it on, at least for ten seconds when the heating element burned out. I had it installed while doing a complete bathroom remodel and now I have to either tear a hole in my new ceiling or wait for a new heating element. Either way I will have to pay the electrition to come back out.
Date published: 2011-12-12
Rated 4 out of
Just as I expected it to be.I may have considered the vent that was quieter if I were to choose again. This is not too noisy but I would ideally like it to be quieter. Easy install. looks great!
Date published: 2011-07-18
Rated 5 out of
A little rought putting in, do to using it to replace a real old unit
took a little extra time and good old Mcgiver enginenuity
Control Systems Services
Date published: 2013-01-01
Rated 4 out of
Heater is very noisyI bought this product and installed myself. Only issue that I have is the noise that comes from the heater element when you turn it on. It's extremely loud to the point of really not wanting to use it. I am trying to see if I can isolate the noise and install some kind of dampers because I believe it's an issue with vibration within the metal housing.
Date published: 2013-02-20
Rated 5 out of
works as plannedheater is powerful enough to easily heat the bathroom, the fan exhausts odors and steam, and this sheds plenty of light in the room (though I use it in conjunction with two other lights). This unit works perfectly in the small bathroom in the cabin we built.
Date published: 2013-06-18
Rated 5 out of
Combination Heater, Fan, LightLove this product. It was relatively easy to install with no surprises. It works very well. The heater output is very strong and warms our bathroom quickly.
Additionally the price was reasonable and delivery was prompt.
I recommend this product without reservation.
Date published: 2014-02-09
Rated 5 out of
I replaced the old one I had and I am very pleased.
Date published: 2014-09-30
I need to replace the plastic light cover, where can I get one?
A. The NuTone 665RP does have replacement parts available. The part number for the light lens is 53740000.
What wall switch model number works with the Model 665RP?
A. The NuTone 665RP will work with the Broan 66W switch.
is it possible to just buy the fan portion of the Nutone 665rsp??
A. It is not possible to buy just the fan portion of the NuTone 665RP.
need to purchase NU Tone 665 Rp motor for heat in the combination heater, fan, light.
A. Assuming you have the NuTone 665RP and you just need the motor, the heat motor is #88569000. If you want the entire heat assembly that is #97017648
What is the difference between this model (665RP) and the 605RP model?
A. The NuTone 665RP Combination Heater features a 100W maximum lamp that provides bright ceiling light. The 605RP model does not provide this feature.
I cannot identify from the replacement parts page which piece is the replacement for the damper/duct connector (part 101183000)
A. 101183000 is the correct replacement for the damper/duct connector on the 665RP
A. The NuTone 665RP light cover lens is the S53740000.
Where can I find a replacement fuse?
A. The only way to get a replacement fuse is to replace the full heating element, as the fuse is integrated with it. Depending on the age of your fan, your heating element will either be round or it will zig-zag through the unit. If it is round, you will need the NuTone 0969B000. If it is zig-zag, you will need the Broan S98004514.
i have vaulted ceilings,no attic and replacing a heater/fan,Do i need to tear down the sheetrock or is there a remodel type ?
A. The NuTone 665RP is designed to be installed to the 2 x 6 beams in your ceiling. With out any crawl space it is going to be difficult to install a new fan without making any changes to the sheet rock.
which side is exhaust?
A. The NuTone 665RP's exhaust is located on the side with the large plastic "O" ring.
Can I order just the heater for 665RP?
A. The replacement heater assembly for the NuTone 665RP fan is the NuTone S97017648.
Can the exhaust fan assembly be upgraded?
A. The NuTone 665RP exhaust fan cannot be upgraded.
Can you buy a replacement light cover for this unit?
A. The NuTone 665RP does have replacement parts available. The part number for the light lens is 53740000. You can see that part here: http://www.ventingdirect.com/nutone-s53740000-part/p1223731.
Does the 4" round duct exit on a side or the end?
A. The NuTone 665RP has a 4" side duct.
What are the dimensions?
The Nutone 665RP housing measures 14 5/8" x 7 7/8" x 5 5/8" and the grille measures 9 7/8" x 16 1/4" x 1 3/4".
What thermostat should I get for the Model 665RP?
The NuTone 665RP will uses a 70TW to as a thermostat.
Buy the NuTone 665RP at Build.com. Research NuTone 665RP online. Find NuTone 665RP features and specifications. Get the best deal by comparing the NuTone 665RP today.
The cost to ship items varies by item, shipment and shipping option.
Free Ground Shipping on Orders Over $49 *
Standard ground shipping transit time is 5-7 business days.
Free Freight Shipping on Orders Over $1500 *
Curb side delivery (also called freight or "LTL" shipping) is reserved for large, heavy, or oversized items like chandeliers, bathtubs, shower doors, etc. Items are palletized and loaded onto a large truck for shipment, and delivered to your curb by scheduled appointment. Transit time is 7-10 business days.
* For exact shipping costs, add the product(s) to your cart and enter your zip code. All offers pertain to the lower 48 states and do not include deliveries to Alaska, Hawaii or Canada.