I'm in a manufactured home with slanted ceiling in the bathroom. Can I install this from the bottom and not in attic access?
The NuTone 763RLN is required to be installed via the attic.

Fan and light operate separately or together
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
The NuTone 763RLN is required to be installed via the attic.
You cannot remove the plastic on the NuTone 763RLN and replace with a decorative fixture.
Yes, this is an exhaust fan.
This takes a 100W incandescent bulb.
The grill on the NuTone 763RLN is held in place by spring retention clips.
The NuTone 763RLN replacement grill and lens is product number 85315000.
Yes, you can wire the unit to a double switch to operate the light and the fan independently.
The NuTone 763RLN has square housing with a rectangular cover. Dimensions: Housing: 9” x 9” x 5¾”; Grille: 12” x 10¾”.
| Housing Depth | 5.75 |
|---|---|
| Function | Bath Fan, Light |
| Light Included | Yes |
| Heater Included | No |
| Motion Sensor | No |
| Category | Sale |
| Configuration | Exhaust Fan |
| Amperage | 1.4 |
| Sones | 2.5 |
| Grille Finish | White Polymeric |
| CFM | 50 |
| Country Of Origin | USA |
| CFM (High) to Sones | 50 to 2.5 |
| Watts Per Bulb | 100 |
| Housing Length | 9 |
| Duct Size | 4" Round |
| Housing Width | 9 |
| Voltage | 120 |
| Bulb Base | Medium (E26) |
| Number of Bulbs | 1 |
| Grille Width | 10.75 |
| UL Listed | Yes |
| Lighting Watts | 100W |
| CFM Range | Under 100 |
| Made in America | Yes |
| Product Weight | 7 |
| Humidity Sensing | No |
| Wattage | 100 |
| Sone Range | Under 3 |
| Installation Type | Ceiling |
| Collection | Value Test |
| Grille Length | 12.25 |
| Bulb Type | Incandescent |
| HVI Certified | Yes |
| Bulbs Included | No |
| UL Rating | Wet Location |
| Housing Height | 5.75 |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store