Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.
NuTone 8664RP Reviews
Rated 5 out of
Good light, fan optionWe had to replace the previous light/fan combination, as the fan wasn't strong enough, and the bath was staying damp. I really wanted to find something compatible, so I would not have to re-fit the opening, dig out Sheetrock, etc. I called NuTone and asked them if this one was compatible, and they were very helpful. This was perfect -- it fit exactly into the same base unit as our previous light/fan combination (Also NuTone). I just plugged it in. THIS fan is much more powerful, and has been working great for the last few months.
Date published: 2011-04-25
Rated 4 out of
Very good purchaseVery good product. Moves a lot of air and is not to noisy. Only problem is with instalation in a existing bath is the cutout in the ceiling it has to exact and i mean exact or the vent cutout will show just a bit after complete instalation. Very satisfied with the product and the service with direct venting.
Date published: 2010-11-15
Rated 1 out of
This fan/light combo is super loud. I'm so sorry I put it in my bathroom. I remodeled two baths and used this one in the master bathroom. I used a Hunter in the guest bath and it's wonderful.
Don't buy this if you want to hear yourself think. It's about as loud as $25 fan.
Date published: 2010-09-30
Rated 5 out of
Great ExhaustIt arrived with a small piece of plastic broken off the collar and was replaced within days. Once installed, it is a bit louder than our last one, but is super at removing the vapor from our new bathroom. We LOVE it and would highly recommend it. It is stylish and can match a variety of decors.
Date published: 2010-03-09
Rated 3 out of
NOISEY FANThis is by far a very nisy fan. IF this was to be used in a bath only I would return it. However, it is in a laundry room and noise is not a big factor.
Date published: 2011-05-15
Rated 5 out of
best round bath exhaust fan everThe Newtone model 8664rp is the best round exhaust fan out in the market today, and it is the best value when buying from lighting direct.
Lighting direct has the best costumer service, and has extra fast shipping.
what else can youask for
Date published: 2010-06-03
Rated 5 out of
Looks Great!I had a really old Nutone heater / light in the bathroom, and I wanted something that would fit in the same opening without having to patch up the plaster ceiling. I had to replace the old housing, but this did the trick and it looks beautiful.
Date published: 2010-11-13
Rated 2 out of
vibration intolerableI installed this ventilation fan/light myself, replacing one of the same specs which had gotten too old to just replace the fan motor. I can tolerate the 3.5 zone level but not the excessive vibration and metal-to-metal rattling of the new device. I will need to muffle this with some kind of rubber or cork sound insulation material. Old model did not need this. Old model was not made in China. (It was that old.)
8664RP would it happen to be the same model as 9092 from years ago. It looks the same. This one in this home would have been from years ago.........Thanks
A. The NuTone 8664RP is not the same model. The closest match would be the NuTone 9093WH.
Is the rough in can 9 X 9 square or 9" round?
A. The NuTone 8664RP housing is 9x9x6" deep. The grille has a 15" diameter.
Does the fan come with housing and mounting rails?
A. Yes, the NuTone 8664RP comes with everything needed for installation.
How do I properly remove the grill cover to replace the lightbulb?
A. Gently pull down on it to get it away from the ceiling then you can remove the spring clips to gain full access to the bulb.
I presently have an old model #8661--will the newer model fit in the existing space or will there need to be a lot of work done?
A. No, the NuTone 8664RP wont fit. You will need a new housing.
is the duct collar reverable - hose comes from the other side - other joist would require a 16 inch opening
A. The NuTone 8664RP duct collar is not reversible.
My fan motor has burned out. How can I replace it?
A. The best way to replace the fan motor for the NuTone 8664RP is to replace the Power Unit Assembly, Broan S97017706.
CAN I BUY A NEW AND MORE DECORATIVE COVER FOR THIS ITEM?
A. The NuTone 8664RP will only work with the suggested replacement parts. You can try calling Nutone directly to see if they can recommend a cover that will work. You can reach them at 888-336-6151.
can the duct collar be reversed to the opposite side - duct work comes from the opposite side
A. The NuTone 8664RP only exhausts from one side but to get the exhaust to come out a different side you can just rotates the housing so he exhaust side of the unit is in a place best suitable for your application.
Will this fan replace a Model 8663-m
A. Yes, the NuTone 8664RP will but the old housing needs to come out. It's the same diameter, however, the housing is different on the inside.
Can the light and fan operate independently, or when one turns on both turn on?
A. The NuTone 8664RP has a light and fan that can operate independently.
Is this considered Type IC (insulation contact)?
A. The NuTone 8664RP is Type IC for use with thermal insulation.
What is the difference between the 8663 and 8664?
A. The NuTone 8664RP does not have a night-light, which the 8663 does.
What are the model numbers for the grille and lens pieces?
The NuTone 8664RP replacement parts are s99111406 for the grille, and s61753000 for the lens.
Buy the NuTone 8664RP in White at Build.com. Research NuTone 8664RP in White online. Find NuTone 8664RP in White features and specifications. Get the best deal by comparing the NuTone 8664RP in White today.
The cost to ship items varies by item, shipment and shipping option.
Free Ground Shipping on Orders Over $49
Standard ground shipping transit time is 5-7 business days.
* This offer excludes deliveries made to Alaska and Hawaii.
Free Freight Shipping on Orders Over $1500
Curb side delivery (also called freight or "LTL" shipping) is reserved for large, heavy, or oversized items like chandeliers, bathtubs, shower doors, etc. Items are palletized and loaded onto a large truck for shipment, and delivered to your curb by scheduled appointment. Transit time is 7-10 business days.
* For exact shipping costs, add the product(s) to your cart and enter your zip code.