Ostberg 613 CFM Circular In-Line Duct Fan with Backward Curved Impeller and 8" Duct from the CK Series
The CK is an in-line centrifugal duct fan with high capacity and excellent reliability. The straight through radial fan is compact and very easy to install. It can cope with high pressure and long duct runs, whilst still operating at acceptable sound levels. The CK range of fans have casings manufactured from galvanized steel and are moisture resistant. They are approved for installation in humid or damp environments being rated IP44 when installed in a duct system. The fan speed can be controlled by voltage variation regulators. Several fans can be connected to the same controller providing the total rating of the controller is not exceeded. The motors are an external rotor type asynchrony motor. They have maintenance free sealed ball bearings and are protected from over heating by thermo contacts. The fans must not be used for transporting grinding dust, soot or similar.
Ostberg is one of the leading manufacturers of in-line duct fans with its head office and manufacturing facility based in Avesta Sweden. All CA Ostberg fans are manufactured from the best quality components and prior to dispatch every fan is tested and the results are computer stored for future reference. Ostberg is a company you can rely on today and in the future.
Quiet and Powerful
Made of Galvanized Steel with a Tough Baked Epoxy Finish
Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.
Ostberg CK8A Reviews
Rated 5 out of
Great FanI installed 2 CK8C at a customer's auto shop and couldn't believe the power. These fans exhuast the fumes from paint quickly and you can't hear them at all. I recommend these for the price over anything else.
Date published: 2011-07-22
Rated 5 out of
quality and performanceI am a fluid dynamics engineer, and this product surpsised me for its quality and very low vibration. The impeller is balanced in test after manufacture in 3D with little clips of differing mass at both front and rear face. At full voltage you do need to have a backpressure, such as a long run of 8" or some duct bends, to avoid "howl" from excessive air velocity. 8" model too powerful for only one 6"x10" register, so slowed it down to 67% of AC voltage with rheostat. Starts fine at very reduced voltage. Plan to split duct to more registers upstairs. Best to use to "push" air rather than for suction. Use insulated flex duct at both suction and discharge to minimize noise. Tried many fans an this is much quieter proportional to the air flow than anything else. All metal design means should tolerate 140degF inlet temperature from furnace duct, but waiting for winter to try before permanent installation. Will need to find flex that tolerates furnace temperatures up to 140degF and duct cleaning air whips.
Date published: 2012-09-14
Rated 5 out of
Great fanI bought this fan for my woodshop in the basement. I would be sanding and then there was a thick cloud all over. I put one of these above my suspended ceiling and branched it off into 3 ceiling register vents.
i clears the room of dust in no time. I vents outside the house. I do know not to leave it on unless needed. It sucks all the heat out too. Very quiet also. Need to buy another for my smoking room in my home also.
Date published: 2012-01-26
what is the sones rating?
A. As the Ostberg CK8A is a remotely mounted fan it does not have a sone rating.
I want to move heated air from one room to another, a distance of about 40 feet: What size fan do I need?
A. The manufacturer, Ostberg said that the CK5C should have plenty power for what you are trying to do.
What type of speed control can be used?
The Ostberg CK8A fan speed can be controlled by voltage variation regulators. Several fans can be connected to the same controller.
Buy the Ostberg CK8A at Build.com. Research Ostberg CK8A online. Find Ostberg CK8A features and specifications. Get the best deal by comparing the Ostberg CK8A today.
The cost to ship items varies by item, shipment and shipping option.
Free Ground Shipping on Orders Over $49
Standard ground shipping transit time is 5-7 business days.
* This offer excludes deliveries made to Alaska and Hawaii.
Free Freight Shipping on Orders Over $1500
Curb side delivery (also called freight or "LTL" shipping) is reserved for large, heavy, or oversized items like chandeliers, bathtubs, shower doors, etc. Items are palletized and loaded onto a large truck for shipment, and delivered to your curb by scheduled appointment. Transit time is 7-10 business days.
* For exact shipping costs, add the product(s) to your cart and enter your zip code.