does anyone make a wet location heat lamp
The Progress Lighting P6952TG is UL listed for damp locations.

| Shipping: | Free Shipping! See Details |
|---|---|
| Ships In: |
Ships in 24 hours.
|
| Finish: |
Satin Aluminum
|
This product has additional required/recommended options. To configure, add to your cart.
Non-IC Bath Heater Light. UL Listed for damp locations, not for use over direct moisture area such as a shower.
Features:
Specifications:
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
The Progress Lighting P6952TG is UL listed for damp locations.
The Progress Lighting P6952TG is UL listed for damp locations to be used in bathrooms
The Progress Lighting P6952TG is only available in Satin Aluminum, and you can install this in new construction.
The Progress Lighting P6952TG is not dimmable.
The issue here is the UL rating. This fixture is rated for a "damp" location, which would be the bathroom in general. Over the shower would be considered a "wet" location due to the constant moisture and humidity. Most customers install this just outside their shower enclosure so it heats upon entry and exit.
The Progress Lighting P6952TG takes a 250 watt maximum blub.
Thank you for your question. The Progress Lighting P6952TG is UL listed for damp locations so it is not necessarily designed to have water directly splashed onto it. The bulb itself fits flush against the trim so that water will not leak into the housing of the fixture.
The Progress Lighting P6952TG is not recommended for use within a shower stall. It can however be installed in damp locations, meaning you could install it in the bathroom.
The Progress Lighting P6952TG uses 120 volts.
Under our Additional Information section above there is a PDF link to view the Installation Sheet for this unit. These instructions will also come with the unit if you decide to purchase.
The P6952TG installation instructions state that "thermal insulation shall not be installed within 3" of recessed housing."
| Housing Included | Yes |
|---|---|
| Diameter | 7.75 |
| IC Rating | Non-IC |
| Bulb Base | Medium (E26) |
| Installation Type | Flush Mount |
| Height | 7.75 |
| Light Direction | Down Lighting |
| Bulb Type | Incandescent or Fluorescent |
| Watts Per Bulb | 250 |
| Theme | Functional |
| Suggested Room Fit | Bathroom |
| Width | 8.375 |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store