The SPIDERfire ® series puts technological breakthroughs to work to deliver 95% thermal efficiency. Rheem's patented heat transfer system dramatically cuts fuel cost and is built to last. The system is engineered as a 'wet base' design wherein the entire heat exchanger is submerged. Where other fully condensing water heaters typically experience hot spots, this system eliminates them. The result is extended life of the product and maximized efficiency. The three-pass heat exchanger tubes are coated inside and out with a specially formulated porcelain enamel designed to protect against condensation.
With SPIDERfire ® you have a choice of venting. Installed with either power-vent or power direct vent. The power direct vent is the recommended choice where negative air pressure or indoor air quality is a concern.
More Venting Options (And Savings)
How? Because more heat is delivered to the water the flue gases are cooler. Cool enough to permit venting through standard PVC, CPVC and ABS pipe, which is cheaper than AL29-4C Stainless steel.
Multiple Water Connections
Water connections are easy with 2" NPT hot and cold water connections on both sides of the unit.
Smart LCD Control System
Standard equipment on all the SPIDERfire ® models is the new diagnostic system. It features a scrollable operational history and enables installers and service technicians to monitor key functions and components.
Faster draining and servicing
Factory installed full-port, full-flow brass drain valve.
Advanced Burner Design
Rheem has increased the burner surface are to provide ultra smooth ignition and quiet operation.
Direct Spark-to-Pilot Ignition Systems
Energy saving ignition that ignites only when there is a call for heat.
- Tank Capacity: 100 Gallons
- Thermal Efficiency: 95%
- Recovery at 60 degree rise: 382 Gallons/Hour
- Recovery at 70 degree rise: 327 Gallons/Hour
- Recovery at 80 degree rise: 286 Gallons/Hour
- Recovery at 90 degree rise: 255 Gallons/Hour
- Recovery at 100 degree rise: 229 Gallons/Hour
- Max BTU Input: 199000
- Warranty: 3 Year Limited Tank
- Altitude Certification: 8999 ft. above sea level
Rheem has been manufacturing water heaters since the 1930's, with coast to coast distribution by 1936. Their product offerings cover commercial and residential heating, cooling, solar water heating systems, conventional storage-style water heaters, tankless water heaters, replacement parts and accessories. Rheem's manufacturing facilities are ISO 9001 certified, with four facilities in the United States. Choose an industry leader that is respected for reliability. Choose Rheem.
Additional Rheem Links
Our SKU: Rheem GHE100-200
This product is listed under the following manufacturer number(s):
- Rheem GHE100-200
*Denotes a finish or option that has been discontinued
Rheem GHE100-200 Product Specifications
|Fuel Type||Natural Gas|
|Height to Gas Connection||73.75|
|Height to Temperature and Pressure Relief Valve||66.4375|
|Max BTU Input||199000|
|Minimum Clearance Rear||0|
|Minimum Clearance Side||0|
|Minimum Clearance Top||6|
|Minutes to Recover Contents||26|
|Required Vent Size||2", 3", 4"|
|Warranty||3 Year Limited Tank|
|Water Pressure (Max)||150|