This product has additional required/recommended options. To configure, add to your cart.
Chain Knocker Recommended
Flue Brush Recommended
K-1500 "B" Frame 115V Sectional Machine with Seven Sections 1-1/4" (C-14) Cable (Total 105 Feet), Mitt, Pin Key, and Rear Guide Hose - For 2" to 8" Drain and Sewer Lines
- The finest all-around sewer and drain cleaning machine.
- One man can easily clean the heaviest blockages – indoors or out. High-speed cleaning gets the job done faster...better.
- Wheels to the job site – sets up fast, cleans up fast.
- Low-profile "B" frame design will fit most crawl spaces, loads and unloads from truck easily.
- Equipped to run, easy to handle, 15-foot sections of 1 1/4" cable to clean 3" to 8" (32m-200mm) lines to 200 feet (61m).
- Easy clutch jaw change-out adapts K-1500 to run 15-foot sections of 7/8" (4.6/22mm) cable through 2" to 4" lines up to 175 feet (50-100mm, 53m).
- Equipped with 3/4 HP motor; 115V Models.
- CSA approved.
- Approved to UL standards (NRTLC).
- A-1 Mitt
- A-12 Pin Key
- A-34-12 Rear Guide Hose
- Seven Sections 11/4" (C-14) Cable Total 105 Feet
- Two A-8 Cable Carriers
- Nine-Piece 11/4" Tool Set
Nine-Piece Tool Set includes:
- T-1 Straight Auger.
- T-3 Funnel Auger.
- T-6 Retrieving Auger.
- A-3516 Hex Key.
- T-13 Sawtooth Cutter.
- T-50-1 Sharktooth Cutter.
- A-2864 Hex Key.
- T-8 Grease Cutter.
- A-3 Tool Box.
Additional Ridgid Links
Our SKU: Ridgid 23707
This product is listed under the following manufacturer number(s):
- Ridgid 23707
*Denotes a finish or option that has been discontinued
Ridgid 23707 Product Specifications
|Country Of Origin||USA|
|Made in America||Yes|
|No Load RPM||640|
|Pipe Capacity||2" - 8"|
|Usable in Sewer Lines||Yes|