Schlage Square Corner 3.5" x 3.5" Steel Plain Bearing Mortise Hinge - Three Hinges
Coordinating with Schlage locks and builders hardware these hinges feature a durable steel construction and lubricated knuckles that prevent binding. When its quality door hardware you are looking for Schlage is what you will find.
- Sold as Three Hinges (Cannot be sold individually)
- Plain Bearing Hinge
- Residential Strength
- Removable Pin: No
- Wood Screws Included
- Square Corners
- Traditional / Classic Theme
- Arc Hole Pattern
Plain Bearing Hinge: Plain bearing hinges feature knuckles that are machined to a smooth surface, allowing them to move against one another without bearings. Plain bearing hinges are not recommended for heavy use on high traffic entrance ways, but meet the need of a standard residential door.
Material - Steel: Steel is cheap strong and durable making it a favorite for hinges of all types. Though it is more prone to rusting than solid brass or stainless steel.
Mounting: The standard corners for mortised door hinges are 1/4" radius, 5/8" radius and square corner. It is recommended that three hinges be used on doors up to and including 7.5 feet with one additional hinge for each additional 2.5 feet. Make sure you check your current hinges before making a purchase.
- 3.5 Inch Height
- 3.5 Inch Width
- Made from Steel
- Mount: Mortise
- Gauge: 0.085" (Thickness of Hinge Steel)
- 5 Knuckles
- 6 Screw holes
For over 90 years, Schlage has been making homes more stylish and secure with the best door locks and door hardware. Today the Schlage family of products also includes the very best in electronic locks, keyless door locks, and home security. Let Schlage's hardware and security solutions protect and enhance the things that matter most to you.
Additional Schlage Links
- View Manufacturer Warranty
- Shop All Schlage Products
- Shop All Schlage General Hardware Collection Products
Our SKU: Schlage 1010
This product is listed under the following manufacturer number(s):
- Schlage SC3P1010F716E
- Schlage SC3P1010F609E
- Schlage SC3P1010F620E*
- Schlage SC3P1010F605E
- Schlage SC3P1010F619E
*Denotes a finish or option that has been discontinued
Schlage 1010 Product Specifications
|Hinge Type||Butt Hinge, Plain Bearing|
|Number of Holes||6|
|Number of Knuckles||5|