Is this deadbolt Flex-Lock?
Thank you for your question. The Schlage BE365-CAM is equipped with FlexLock.

| Shipping: | Free Shipping on orders over $199.00! See Details |
|---|---|
| Ships In: |
Availability based on Finish selected
|
| Finish: |
This product has additional required/recommended options. To configure, add to your cart.
Allows you unlock and lock the deadbolt without the use of a key. It features an electronic keypad on the outside and a thumb turn on the interior. Perfect for front doors, side & back doors, and garage entry doors.
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
Thank you for your question. The Schlage BE365-CAM is equipped with FlexLock.
Ordering separate finishes from exterior to interior is possible. Ordering like this is called "Split Finish". This is a special order situation that would require an over the phone order. This would also be special order from the manufacturer and the lead time may vary. Please contact custoemr service at 888-649-0865 if you need a split finish item.
The Schlage BE365-CAM will still keep your codes. Replacing the battery will not erase anything.
The Schlage BE365-CAM is going to be able to be keyed alike with the 5 digit key code on your key. A locksmith will also be able to let you know the code if it is not on the key.
The Schlage BE365-CAM would be fine for your exterior gate. They have been weather tested.
The Schlage BE365-CAM is able to be rekeyed by manipulating the pins on the keyway. A special kit is required to do this with all non-smart key locks, meaning it would be best to take it to the locksmith.
The technical instructions can be provided by Schlage directly.
The Schlage BE365-CAM is reversible and can be installed on either a right or left handed door. When preparing for installation the instuctions will inform you how to switch the handing. In short, the latch can be rotated to face either direction. You will need to make sure you have the correct side of the latch facing up though. There is marking on the latch to help you know which side needs to be facing up.
The Schlage BE365-CAM is only designed as a single cylinder.
This will fit the same standard bore hole size a 2 1/8" diameter, same adjustable backset and door thickness. The old deadbolt will need to be removed starting from the screws on the interior side, then the electronic dead bolt will be able to be installed in its place. It does not have any additional installation requirements and no wiring required.
Yes, the keypad on the Schlage BE365-CAM does illuminate once you push any button from the exterior side of the lock.
The Schlage BE365-CAM has an overall height of 5.426" and an overall width of 3.172". The measurement from the center of cylinder to the bottom of the unit is 2.0". The is depth is 2.186"
| Function | Keypad Deadbolt |
|---|---|
| Product Class | Residential |
| Cylinder | 5 Pin Schlage C |
| Cross Bore | 2-1/8" |
| Handing | Left, Reversible, Right |
| ADA | No |
| Edge Bore | 1" |
| ANSI Certification | A156.5 |
| Collection | BE/FE Series, Camelot, Electronic Security |
| Door Thickness | 1-1/2", 1-3/4", 1-3/8", 1-5/8" |
| Backset | 2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4" |
| Latch Faceplate | Drive-In, Round Corner, Square Corner |
| BHMA Certification | Grade 2 |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store