Schlage BE365CAM609 Antique Brass Camelot Electronic Keypad Single Cylinder Deadbolt

- Item #: BCI490558
$112.70
Originally $240.00, You Save 53%
Antique Brass
Free Shipping!
42 In Stock
Ships in 1 Business Day

Discontinued

Please select a finish

Earn 112 - 124 points with the purchase of this product Learn More
×

and earn 350pts

Questions about Schlage BE365CAM609?

Contact us for advice or more details. Our product specialists are here to help.

Configure your Schlage BE365CAM609 Camelot Electronic Keypad Single Cylinder Deadbolt

  • Free Keying Option more info ►

    Choose "Keyed Alike" to use the same key on multiple locks or "Keyed Different" to ensure that your locks will have different key codes.


    Please contact customer service for quotes on master keying or to key multiple manufacturers alike.


    Two keys provided per key code.

    • Please Select One

Discontinued

Please select a finish

$111.66 - $124.43
  • Is this deadbolt Flex-Lock?

    A. Yes, the Schlage BE365-CAM is equipped with FlexLock.

  • CAN i MIX AND MATCH THE INTERIOR AND EXTERTIOR FINISH? , AND IF SO HOW CAN I PURCHASE THEM THAT WAY?

    A. Ordering separate finishes from exterior to interior is possible. Ordering like this is called "Split Finish". This is a special order situation that would require an over the phone order. This would also be special order from the manufacturer and the lead time may vary. Please contact customer service at 888-649-0865 if you need a split finish item.

  • Do you have to put your codes in again after you change the battery ?

    A. The Schlage BE365-CAM will still keep your codes. Replacing the battery will not erase anything.

  • All of my doors have the same key. How would I get this lock to use my existing key?

    A. You will need to obtain the 5 digit key code for your existing locks. If you don't know this, a locksmith can find this for you. Once you have that, enter the code in the optional text box "Key Code for Keys" under "Free Keying Option" when you order the product, and it will be keyed to match.

  • Can this unit be used on an exterior gate? If not is there one that can?

    A. The Schlage BE365-CAM would be fine for your exterior gate. They have been weather tested.

  • how do you change key code

    A. The Schlage BE365-CAM can be rekeyed by manipulating the pins on the keyway. On non-SmartKey locks, a special kit is required to do this, so it would probably be best to take it to the locksmith.

  • I ordered this lock for my new home and the instructions to set the lock combination and work it were lost. Can I get another instruction booklet?

    A. We have the programming guide available on our product page.

  • Can the BE365-CAM be install on either a right or left hand door?

    A. The Schlage BE365-CAM is reversible and can be installed on either a right or left handed door. When preparing for installation the instuctions will inform you how to switch the handing. In short, the latch can be rotated to face either direction. You will need to make sure you have the correct side of the latch facing up though. There is marking on the latch to help you know which side needs to be facing up.

  • Can the thumb turn be replaced by a keyed cylinder on the inside?

    A. The Schlage BE365-CAM is only designed as a single cylinder.

  • If I already have a Schlage deadbolt installed, what else will I have to do to the door to install this electronic lock?

    A. This will fit the same standard bore hole size a 2 1/8" diameter, same adjustable backset and door thickness. The old deadbolt will need to be removed starting from the screws on the interior side, then the electronic dead bolt will be able to be installed in its place. It does not have any additional installation requirements and no wiring required.

  • Is the keypad lighted or illuminated?

    A. Yes, the keypad on the Schlage BE365-CAM does illuminate once you push any button from the exterior side of the lock.

  • What are the overall dimensions of this deadbolt? I need to make sure that it will fit above my current lever. More importantly what is the distance from the middle of the cylinder (or dead blot thumb latch) to the bottom of the face plate?

    A. The Schlage BE365-CAM has an overall height of 5.426" and an overall width of 3.172". The measurement from the center of cylinder to the bottom of the unit is 2.0". The is depth is 2.186"

  • What type of batteries does this use?

    A.

    The Schlage BE365-CAM takes a 9v battery.

Buy the Schlage BE365CAM609 in Antique Brass at Build.com. Research Schlage BE365CAM609 in Antique Brass online. Find Schlage BE365CAM609 in Antique Brass features and specifications. Get the best deal by comparing the Schlage BE365CAM609 in Antique Brass today.

prod22014Fin
Recently viewed items
× Shipping Rates & Methods

The cost to ship items varies by item, shipment and shipping option.

Free Ground Shipping on Orders Over $49

Standard ground shipping transit time is 5-7 business days.

* This offer excludes deliveries made to Alaska and Hawaii.

Free Freight Shipping on Orders Over $1500

Curb side delivery (also called freight or "LTL" shipping) is reserved for large, heavy, or oversized items like chandeliers, bathtubs, shower doors, etc. Items are palletized and loaded onto a large truck for shipment, and delivered to your curb by scheduled appointment. Transit time is 7-10 business days.

* For exact shipping costs, add the product(s) to your cart and enter your zip code.

Learn more about shipping rates and policies