Schlage Camelot Double Cylinder Sectional Handleset with Right Handed Callington Lever Interior Pack

Camelot Double Cylinder Sectional Handleset with Right Handed Callington Lever Interior Pack

The distinctive design of the Camelot combines architectural inspired arches with graceful curves. The two-piece design offers flexibility for doors with non-standard hole locations while providing a classic appearance for smaller entrance ways. A double cylinder handleset means the Interior and Exterior sides will only unlock by using a key. There is not a thumb turn on the interior side to unlock.

Handleset Features

• This Handleset Replaces the F362
• Replaces virtually any existing lock
• Easy installation: One-person project; no extra hands needed
• ANSI Grade 1 with maximum security features
• Lifetime finish and mechanical guarantee
• Designs and finishes to match any home's architectural style

Deadbolt Features

• 1/2" of bolt left in housing when bolt is thrown for added kick-in resistance.
• Integrated anti-pick shield with SNAP and STAY self-adjusting tension provides added security and simplifies installation.
• 1" door prep required for larger bolt housing.
• Zinc bolt has hardened steel pin inside that spins in response to sawing attack and can't be cut through.
• Bolt diameter is 10% larger than typical bolts for maximum kick-in resistance.
• Adjustable backset has the industry's only helical design that locks into place with no adjusting during installation. Fits both 2-3/8" and 2-3/4" backsets.
• Faceplates (Part 12-326): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates
• Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4" x 1-5/8"