Camelot Double Cylinder Sectional Handleset with Right Handed Callington Lever Interior Pack
The distinctive design of the Camelot combines architectural inspired arches with graceful curves. The two-piece design offers flexibility for doors with non-standard hole locations while providing a classic appearance for smaller entranceways. A double cylinder handleset means the Interior and Exterior sides will only unlock by using a key. There is not a thumbturn on the interior side to unlock.
- This Handleset Replaces the F362
- Replaces virtually any existing lock
- Easy installation: One-person project; no extra hands needed
- ANSI Grade 2 with maximum security features
- Lifetime finish and mechanical guarantee
- Designs and finishes to match any home's architectural style
- 1/2" of bolt left in housing when bolt is thrown for added kick-in resistance.
- Integrated anti-pick shield with SNAP and STAY self-adjusting tension provides added security and simplifies installation.
- 1" door prep required for larger bolt housing.
- Zinc bolt has hardened steel pin inside that spins in response to sawing attack and can't be cut through.
- Bolt diameter is 10% larger than typical bolts for maximum kick-in resistance.
- Adjustable backset has the industry's only helical design that locks into place with no adjusting during installation. Fits both 2-3/8" and 2-3/4" backsets.
- Faceplates (Part 12-326): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates
- Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4" x 1-5/8"
Additional Schlage Links
Our SKU: Schlage F62-CAM-CLT-RH
This product is listed under the following manufacturer number(s):
- Schlage F62CAM716CLTRH
- Schlage F62CAM609CLTRH
- Schlage F62CAM620CLTRH
- Schlage F62CAM505CLTRH
Lifetime Polished Brass
- Schlage F62CAM613CLTRH
Oil Rubbed Bronze
- Schlage F62CAM605CLTRH
- Schlage F62CAM625CLTRH
- Schlage F62CAM626CLTRH
- Schlage F62CAM619CLTRH
*Denotes a finish or option that has been discontinued
Schlage F62CAM505CLTRH Product Specifications
|BHMA Certification||Grade 2|
|Backset||2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"|
|Center to Center||5.5|
|Cylinder||5 Pin Schlage C|
|Door Thickness||1-3/4", 1-5/8", 1-7/8", 2"|
|Function||Double Cylinder, Double Cylinder Handleset|
|Grip Center to Center||8.5|
|Interior Handle Style||Lever|
|Latch Faceplate||Drive-In, Round Corner, Square Corner|
|Lock Style||Single Point|