This product is listed under the following manufacturer number(s):
Schlage FE285PLY716FLARH Aged Bronze
Schlage FE285PLY609FLARH Antique Brass
Schlage FE285PLY620FLARH Antique Pewter
Schlage FE285PLY505FLARH Lifetime Polished Brass
Schlage FE285PLY613FLARH Oil Rubbed Bronze
Schlage FE285PLY625FLARH Polished Chrome
Schlage FE285PLY626FLARH Satin Chrome
Schlage FE285PLY619FLARH Satin Nickel
*Denotes a finish or option that has been discontinued
Schlage FE285PLY619FLARH Product Specifications
2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"
Center to Center
Electronic Security, Flair, Plymouth
5 Pin Schlage C
1-1/2", 1-3/4", 1-3/8", 1-5/8"
Lower Half - Front Entry Set, Single Cylinder
Drive-In, Round Corner, Square Corner
Installation Resource Center
Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.
Schlage FE285-PLY-FLA-RH Reviews
Rated 5 out of
Useful for other deadbolt optionsThis is the product that you'll want if you have an electronic lock or a different high security option (Abloy, Medeco, etc). Schlage offers a good range of finishes that can match or come very close to matching other company's finishes. They are also one of the few companies where you can find the handle without the matching deadbolt (not used for e-locks). I matched an Abloy deadbolt in satin brass to the Schlage handleset with no problems. The initial quality of the product is very good (solid handle, good mounting system, & good opening mechanism). The longevity of the product remains to be seen. However, I have not heard of any problems with Schlage. On the other hand, my Kwikset's finish was peeling which is why I had to replace the handleset. I would have considered Baldwin but I could not find an option without an included deadbolt.
When installing this product, pay careful attention to the setting of the lever handle in relation to the inner mechanism and mounting screws. If you don't connect it correctly then your handle will not work and you'll have to redo your work.
My Handlesets.com order was completed promptly and the shipping took a few days. I would definitely recommend this site to others, I ended up saving a large amount of $$$ versus buying this product at the local home store.
Date published: 2011-05-02
Rated 5 out of
this handle looks good with our combo lock. it fits with the door style and makes the combo look less
modern, which i was looking for.
Date published: 2011-01-10
Rated 3 out of
OK, but not great.The smoothness of operation on this leaves something to be desired. It is not dirt cheap, so I expected a certain smoothness when depressing the lever on either side and I expected a smooth retraction then full extension. This sticks sometimes and it has nothing to do with the installation...it did this when out of the door too (as a test). It is a mechanical/friction device, very simple (so hopefuly it won't break) but very primitive in it's smoothness.
Date published: 2011-09-02
Rated 5 out of
keyless lock setWhat a great product, i installed it myself in less than an hour. The keyless entry deadbolt works super, no probems. The matching door handle is a wonderfull match. Thanks Ron P.
Date published: 2012-04-03
Rated 5 out of
Lower unit handle setWe purchased a z-wave lock and needed the companion handle set for our front door. The handle matches the oil rubbed bronze keypad and has a similar foot print to our old handle set so we had less touch up painting to do.
Date published: 2012-09-05
Rated 5 out of
Excellent.Great quality. Exactly as pictured.
Date published: 2013-06-25
What dead bolt in satin nickel matches this?
A. The Schlage BE365-PLY in satin nickel would match this perfectly.
What is the dimensions from center to center from top to bottom. This is a replacement handle and I want to make sure it will match existing holes.
A. The Schlage FE285-PLY-FLA-RH is 5 1/2" on center.
What is pictured looks like a left handed lever, but the description says right handed. Does "left handed" refer to the hand you would use to open the door or the direction the lever points or what?
A. The image actually is a right handed set. The lever and cap shown are the interior pieces for the handleset. From the inside, yes, the lever will be on the left side. But, handing for door hardware is determined from the exterior. When outside, facing the door, if the hinges are on the right side of the door, it's a right handed lever. This fixture is a right handed fixture. We apologize for any confusion.
Do they make dummy handsets for Electronic Keypad Single Cylinder Deadbolt so if you have double doors it would look uniform from the outside?
Unfortunately currently there is not a dummy set that will look like the electronic key pad. You can either buy a different dummy set that can match the color and design of the lower handle or you buy two keypads.
Buy the Schlage FE285PLY619FLARH in Satin Nickel at Build.com. Research Schlage FE285PLY619FLARH in Satin Nickel online. Find Schlage FE285PLY619FLARH in Satin Nickel features and specifications. Get the best deal by comparing the Schlage FE285PLY619FLARH in Satin Nickel today.
The cost to ship items varies by item, shipment and shipping option.
Free Ground Shipping on Orders Over $49 *
Standard ground shipping transit time is 5-7 business days.
Free Freight Shipping on Orders Over $1500 *
Curb side delivery (also called freight or "LTL" shipping) is reserved for large, heavy, or oversized items like chandeliers, bathtubs, shower doors, etc. Items are palletized and loaded onto a large truck for shipment, and delivered to your curb by scheduled appointment. Transit time is 7-10 business days.
* For exact shipping costs, add the product(s) to your cart and enter your zip code. All offers pertain to the lower 48 states and do not include deliveries to Alaska, Hawaii or Canada.