If the strongest, quietest, bathroom exhaust system is what you seek look no further. S&P offers the perfect solution with the most options. The popular and exclusive TD series bathroom exhaust kits (for single or dual venting points) or the ultra powerful PV series (also, in single or dual vents) for long or complicated duct runs. All S&P bath kits offer remotely mounted fans featuring a powerful motor mounted in the attic (away from the living space). The result is a Turbo powered fan (much stronger than generally associated with bathroom exhaust) and yet a peacefully quiet operation.
ABS fan blades.
Thermal link via fuse.
Permanently lubricated ball bearings.
Speed controllable 2-speed motor.
Independently safety tested by Underwriters Laboratories, Inc. and are UL and cUL Listed.
Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.
Soler and Palau KIT-TD100X Reviews
Rated 5 out of
Jim R from
Soler and Palau KIT-100X in-line fan.I bought this for a powder room on the first floor of our midcentury modern. I installed in with the intake in the powder room (the design was perfect and fit in nicely) and the fan was installed within a cabinet in the adjacent room. I used a wireless switch to provide power and connected the wires so that the highest speed was used. Doing retro fits in a 1959 modern can be a challenge, mainly because the materials of construction were meant to last a very long time. The fan runs quietly and reliably. I love it
Date published: 2014-09-22
Rated 4 out of
mikeInstalled fan in my bathroom.Fan on hi much to loud had to go in attic again and move wires to run on low It's much better wish it was still lower sounding. Still much better then other bathroom fans.The bathroom is small so low will do.
Date published: 2014-04-20
Rated 5 out of
good productVery quiet , since the fan is not right above your head . Seems relatively powerful for the vent size. Easy to install . The wiring instructions are not very clear in the manual . I eventually figured it out , but they need better pictures and details . There is a speed control module in the wiring box that they just dont explain how it is utilized very well . (not being an electrician) . Overall , very happy with this fan .
Date published: 2013-06-04
Rated 5 out of
Excellent, versatile, vent fanI installed this fine, quiet fan to move hot & cold air from my basement to my converted screen porch, which is now a 4 season Florida room. I was going to put it the foundation wall, but used plan B, drilled out a 4in hole, put the fan in a wood box, air flow is excellent, the fan is quiet,only 37 watts, and I can just turn either the motor around, or the box it's in to reverse the flow. Saves me from expensive electrical heating and cooling costs. Just connected it to a timer to come on 30 minutes every 2hrs .Problem solved!
Date published: 2013-04-01
Rated 4 out of
Good Product, some problemsThe product is good, two speeds, good airflow but there is an small engineering defect in the cover that encases the electrical connection. The bosses that hold the cover screws are weak and can strip or break quite easily. Other than that, good product.
Date published: 2011-05-28
Rated 4 out of
Remote quietnessDirections were simple. Bracketry and hardware were included. Fan is very quiet and works well in a standard size full bath.
Date published: 2009-12-21
Does the TD100x Kit include any 4" flex hose?
A. The Soler and Palau KIT-TD100X comes with everything shown.
How may amps does the motor pull on each of the speeds?
A. Soler and Palau do not have a amp rating for the lower speed, but it pulls 0.71 amps on high speed.
I live in Florida and our attic temps get really hot. Is this fan able to with stand high attic temps? I don't know what it is in reality but it gets really hot up there!
A. Yes, the Soler and Palau KIT-TD100X is definitely built to withstand high teperatures in attics. That's what these are built for!
Can it be mounted vertical or at any angle ?
A. The Soler and Palau KIT-TD100X can, according the their installation instructions, "be mounted in any orientation, horizontal or vertical [including angles], and is suitable for numerous types of applications".
What do you use for the visable collection point? Are these only for use to replace a regular motor and face plate that has quit working. I have a Nutone 13'' circlar with light that is doa. I could connect this to the housing but the housing is all rusty and I would prefer to replace the whole unit but with the inline motor as they draw more air.
A. This is a full kit including the In-Line Fan, Housing, Grill, and Exhaust plate.
Buy the Soler and Palau KIT-TD100X at Build.com. Research Soler and Palau KIT-TD100X online. Find Soler and Palau KIT-TD100X features and specifications. Get the best deal by comparing the Soler and Palau KIT-TD100X today.
The cost to ship items varies by item, shipment and shipping option.
Free Ground Shipping on Orders Over $49 *
Standard ground shipping transit time is 5-7 business days.
Free Freight Shipping on Orders Over $1500 *
Curb side delivery (also called freight or "LTL" shipping) is reserved for large, heavy, or oversized items like chandeliers, bathtubs, shower doors, etc. Items are palletized and loaded onto a large truck for shipment, and delivered to your curb by scheduled appointment. Transit time is 7-10 business days.
* For exact shipping costs, add the product(s) to your cart and enter your zip code. All offers pertain to the lower 48 states and do not include deliveries to Alaska, Hawaii or Canada.