Soler & Palau TD 6"/150MM Inline Mixed Flow Duct Fan
The S&P TD-MIXVENT series of in-line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of housing sizes. This makes the TD-MIXVENT series the ultimate solution for small to medium sized ventilation installations which require a high airflow to pressure ratio and occupy only the minimum space possible. Example: false ceiling voids, cabinets and many other limited space environments.
ABS fan blades.
Thermal link via fuse.
Permanently lubricated ball bearings.
Speed controllable 2-speed motor.
Independently safety tested by Underwriters Laboratories, Inc. and are UL and cUL Listed.
Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.
Soler and Palau TD-150 Reviews
Rated 5 out of
Very nice fanI bought two and installed an air exchange system between my upstairs and downstairs to keep the temperature equal between the two spaces. It was important to me that the system be very quiet.
I contacted the manufacturer before my purchase for a recommendation on fan size and type. They recommended this model.
The fans are mounted inside a drop ceiling, connected to dedicated supply and return ducts, and wired to a thermostat. The thermostat is programmed to cycle the fans periodically for air exchange or run them constantly when the temperature downstairs exceeds a set point due to my wood stove operating,
When I first saw them, I was concerned they were too small. However, I found they are very quiet and move a lot of air. I wired them up on the low speed and that is more than enough. The more distance you have between the fan and its supply or return grill the quieter your application will be. I can barely hear them run.
Date published: 2011-11-08
Rated 4 out of
Works wellThe documentation is paltry, but it's a pretty straight forward device. The two sides come off for mounting, and one side has a baffle in it, which I didn't realize till it was too late. I had to assemble it each way and evaluate which one was more quiet.
It's mounted above a suspended ceiling and is quiet enough to not disturb anyone or even make anyone raise their voice (when wired on the high speed). You can hear a low "whirr" in the background, similar to perhaps a central A/C.
Date published: 2011-09-30
Rated 5 out of
Great BuyThis fan moves air quietly. It was easy to install and does the job I intended it to. Draws moist air out of my sun room when using my hot tub, room size is 14 x 21. Installed in unheated attic. Hope it lasts!
Date published: 2013-03-28
Rated 5 out of
Quality construction, low noise.
Date published: 2012-07-03
Rated 5 out of
The fan is very quiet and powerfulThis fan is very quiet and powerful. I am using it with a 4 bathroom common duct into an air to air heat exchanger to heat outside air. Venting Direct had a better price by 10% than the local industrial wholesaler so that is why I bought it from them. Their shipment was very prompt!
Date published: 2012-05-15
Rated 4 out of
Well built at a good priceBought this as a blower for a fireplace (blowing into the air space around the box) and it works great; moves a good amount of air pretty quite. I recommend wiring it to either the high or low speeds. Installing a dimmer on it and running it at lower speeds doesn't work so well as it has a low tone humm. I definately recommend the product and this site.
Date published: 2012-04-13
Rated 3 out of
???I have no ideal how it run but it is nice and small.
6" opening and the body is about 7" or 8.5" with electrical box.
"Just a guess"
Date published: 2012-03-23
Rated 4 out of
What I expectedI had another 6" mushroom fan for air filtration that was twice as strong, metal, and twice as much cost. I was looking for a fan that wasn't as powerful, loud or as costly and took a shot at this one. I was however concerned with it being "reinforced PVC". As it turns out, while installing it I dropped it and the edge of it chipped about 1/2" of the edge. I repaired and installed it anyway. I found it was very quiet and suited my needs perfectly. I liked that it had 2 speeds, of which I wired it for the stronger of the 2. The CFM worked out to be just right for my needs and it was easy to install. The metal fan I wound up putting a dimmer switch on so I could add some flexibility to it so it would suit my needs.
Yes, I'd recommend this fan to anyone that has to move air quietly and cost effectively. In fact I expect to order another one soon. I called and asked a few questions about the fan before ordering and got help quickly. Shipping was quick as well. It arrived 3 days early!
I've read that these units do NOT come with a power cord and need to be purchased separately. Is this true, and if so what do I need to make this plug&play?
A. You will need standard romex wire (3 wire) and a plug.
Can this be run on a dimmer switch for infinite speed varibility?
A. You will need a variable fan speed controller.
Does Soler and Palau provide a mounting bracket for this unit?
A. The Soler and Palau TD-150 comes with the mounting bracket.
I need to control cfm from a minimum of 160 cfm up to 290+- . Can this be accomplisehd with this unit? also , drawing heat from ceiling down approx 18' to floor. Any thoughts appreciated. Require 3 units for the job. accomplished using this unit
A. The Soler and Palau TD-150 is capable of moving more than 290 with 3 units combined. The distance shouldn't be a factor.
voltage of td-150 inlineductfan
A. All TD - MIXVENT series fans operate from a standard 120V 60Hz A.C electrical supply.
Are these fans rated for kitchen range hood exhaust? Also, can these be used in both kitchens and bathrooms?
A. The Soler and Palau TD-150 can be used in a kitchen range hood and can also be used in a bathroom. When installed in a range hood, Soler and Palau recommend installing the fan at least 5' above the cooking surface and also recommend using a grease filter in conjunction with the fan for maximum product life and performance.
I am looking at a TD-150 to replace a DB2 duct fan used for crawl space ventilation. Only need to move about 200cf of air, and it is on a timer to run 1 hour three times a day. Would this be a sutable replacement in a 6" duct? The fans used for Radon are all vertical mounts, whereas this one can be horizontal--which is what I need.
A. Yes, the Soler and Palau TD-150 will work just fine for this application.
Buy the Soler and Palau TD-150 in Off-White Reinforced Plastic at Build.com. Research Soler and Palau TD-150 in Off-White Reinforced Plastic online. Find Soler and Palau TD-150 in Off-White Reinforced Plastic features and specifications. Get the best deal by comparing the Soler and Palau TD-150 in Off-White Reinforced Plastic today.
The cost to ship items varies by item, shipment and shipping option.
Free Ground Shipping on Orders Over $49 *
Standard ground shipping transit time is 5-7 business days.
Free Freight Shipping on Orders Over $1500 *
Curb side delivery (also called freight or "LTL" shipping) is reserved for large, heavy, or oversized items like chandeliers, bathtubs, shower doors, etc. Items are palletized and loaded onto a large truck for shipment, and delivered to your curb by scheduled appointment. Transit time is 7-10 business days.
* For exact shipping costs, add the product(s) to your cart and enter your zip code. All offers pertain to the lower 48 states and do not include deliveries to Alaska, Hawaii or Canada.