Can the BA-BX-4 be directly wired to a wall switch or does it go thru some kind of transformer
The WAC Lighting BA-LIX-4 is equipped with on/off, hi/low switch. No Transformer Required

This product has additional required/recommended options. To configure, add to your cart.
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
The WAC Lighting BA-LIX-4 is equipped with on/off, hi/low switch. No Transformer Required
The WAC Lighting BA-LIX-4 is dimmable
The WAC Lighting BA-LIX-4 can use three different interconnect cables. WAC Lighting BA-IC12 in 12", WAC Lighting BA-IC24 in 24", and the WAC Lighting BA-IC36 in 36".
The WAC Lighting BA-LIX-4 is only set up as a hardwired item.
The WAC Lighting BA-LIX-4 Light Bar is 24"W x 3.12"D x 1"H, and the WAC Lighting BA-X3 fixture is 19.5"W x 4.12"W x 1.25"H.
The WAC Lighting BA-LIX-4 is compatible for that application.
The WAC Lighting BA-LIX-4 comes with everything you need to wire it to a wall switch.
Yes, the WAC Lighting BA-LIX-4 comes with four Xenon Bi-Pin bulbs.
The WAC Lighting BA-LIX-4 is not available in an LED version.
Yes, this is a 120 volt light.
| Bulb Base | Bi Pin |
|---|---|
| Bulb Type | Xenon / Krypton |
| Collection | Premier |
| Depth | 3.12 |
| Finish Application | Satin |
| Height | 1.00 |
| Length | 23.75 |
| Light Direction | Down Lighting |
| MasterFinish | Bronze Tones, Nickel Tones, Whites |
| Number of Bulbs | 4 |
| Suggested Room Fit | Kitchen |
| Theme | Modern |
| Voltage | 120 |
| Wattage | 100 |
| Watts Per Bulb | 25 |
| Width | 24.00 |
Like many retailers, Build.com can choose to set its own prices independently. And even though manufacturers require Build.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at Build.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
Build.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. Build.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
Build.com is a
Build.com, Inc Network Store