This product has additional required/recommended options. To configure, add to your cart.
Interior Handle Required
Augusta Single Cylinder Keyed Entry Handleset from the Welcome Home Series
Augusta Handleset with a Single Cylinder Keyed Entry Deadbolt. The latch bolt is operated by a thumb piece on the exterior handleset and knob/lever on the interior (depending on which interior pack you select). The Single Cylinder Deadbolt is operated by a key from the exterior and a thumb turn on the interior.
Adjustable Backset to 2-3/8" or 2-3/4"
ANSI Grade 2 Rating meets light commercial and exceeds residential building requirements
Exceeds standard residential security requirements
Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.
Weiser Lock GA9771A Reviews
Rated 5 out of
good dealPrice on handlesets.com is way better than that 'direct buy' merchandise store. My mistake was in not specifying the kind of interior knob I wanted, thinking the old weiser round knob would fit this new handleset. Wrong! Do need to specify the interior choice, round knob or lever. I didn't, and I got the lever type.
Date published: 2011-09-20
Rated 4 out of
All's Well That Ends WellI ordered this, and the set screw was faulty. I reported it, and was sent a new one which works great. I appreciate good customer service like that.
Date published: 2011-04-20
Rated 4 out of
Fantastic Product, BUT......This product was everthing as advertised. After the repacement it looks so much better that our original hardware. The one thing that needs to be changed is that there were only directions on how to changing the keying of the lock (a feature I fell in love with). Not one installation instruction anywhere. It was a puzzle at points of the installation. I believe that a 20 minute job was turned into a hour and 30 minutes because of the lack af even the basic of instructions. The product is great, it looks fantastic, but directions could only help.
Date published: 2013-10-23
Rated 4 out of
Not the Same OneI bought this to replace the Weiser I bought in the mid 90s, as it was becoming discolored and I couldn't clean it. I couldn't find the same model number on Weiser's website, so I called the company at least twice to confirm that this was the same model as the one I currently had. I did not want to have to re-stain the door, drill new holes, etc. if the new one did not line up with the old. I was assured that this was the same one. Well, when I installed it, I discovered that the handle part was longer than the old one and extended below the old one. I had a heck of a time finding a stain to match (it doesn't), and I had to drill a new hole to secure the bottom on the handle. If I'd known this before I ordered, I wouldn't have spent over $200 - I would have gotten something less expensive.
Date published: 2014-01-21
If the GA9771A polished brass outside handle spring is damaged, is it possible to order just a spring or the outer handle ?
The Weiser Lock GA9771A is covered under a lifetime warranty through Weiser; they can be reached at 1-800-422-4278. We do not carry just the spring for the lock. The external portion can be purchased by itself.
What is the difference in grades?
A. Grade 1 will be a commercial grade. It will give added security. This is the top grade. Grade 2 is standard for residential applications. They still give great security, where a grade 1 lock is not necessary. Grade 3 is the lowest grade. The durability and security is a lower.
How long does warranty last?
A. The Weiser Lock GA9771A has a limited lifetime mechanical warranty.
trying to replace door handle have no # to verify looks like a ga9771a or 2a only #s I can find is on lock porsion 810010 and 1019
A. You won't be able to find an exact match unless it is a pretty new item you are replacing, you just need to make sure that it will fit the same drilling. The Weiser Lock GA9771A is 9-11/16” from the center of the handle to the hole for the bottom of the handle. It uses 2-1/8" Cross Bore. As long as that will fit what you have then it should be good.
When the specs indicate app. 10 inches from center to bottom. is that measurement from the thumb latch
A. Essentially, yes. The measurement is actually from the center of the bore hole in the door to the bottom.
how do i use my current key for my new lock
A. You would need to find out what your key code is. You can do that by bringing it to a locksmith. Once you have that, you can input that number while ordering with us.
How long is the warranty good for?
A. The Weiser Lock GA9771A has a liftime mechanical and finish warranty.
Buy the Weiser Lock GA9771A at Build.com. Research Weiser Lock GA9771A online. Find Weiser Lock GA9771A features and specifications. Get the best deal by comparing the Weiser Lock GA9771A today.
The cost to ship items varies by item, shipment and shipping option.
Free Ground Shipping on Orders Over $49 *
Standard ground shipping transit time is 5-7 business days.
Free Freight Shipping on Orders Over $1500 *
Curb side delivery (also called freight or "LTL" shipping) is reserved for large, heavy, or oversized items like chandeliers, bathtubs, shower doors, etc. Items are palletized and loaded onto a large truck for shipment, and delivered to your curb by scheduled appointment. Transit time is 7-10 business days.
* For exact shipping costs, add the product(s) to your cart and enter your zip code. All offers pertain to the lower 48 states and do not include deliveries to Alaska, Hawaii or Canada.