Grundfos SP 461A Multistage Submersible Pump with a Rated Flow of 203 US GPM, a Rated Head of 24.6 Ft and Stainless Steel Construction
Model: G15B736A1|Item: bci1687744
Details
SP 461A Multistage Submersible Pump with a Rated Flow of 203 US GPM, a Rated Head of 24.6 Ft and Stainless Steel Construction
SP 461A Multistage submersible pump for raw water supply, groundwater lowering and pressure boosting. The pump is suitable for pumping clean, thin, non-aggressive liquids without solid particles or fibers. The pump is made entirely of Stainless steel DIN W.Nr. DIN W.Nr. 1.4301 and suitable for horizontal and vertical installation. The pump is fitted with a built-in non-return valve. The motor is a 3 phase motor of the canned type with a sand shield, liquid lubricated bearings and pressure equalizing diaphragm.
Technical:
- Speed for pump data: 3450 rpm
- Rated flow: 203 US gpm
- Rated head: 24.6 ft
- Shaft seal for motor: HM/CER
- Approvals on nameplate: CE,GOST2,CSA
- Curve tolerance: ISO9906
Material:
- Pump: Stainless steel
- Pump: DIN W.-Nr. 1.4301
- Pump: AISI 304
- Impeller: Stainless steel
- Impeller: DIN W.-Nr. 1.4301
- Impeller: AISI 304
- Motor: Stainless steel
- Motor: DIN W.-Nr. 1.4301
- Motor: AISI 304
Installation:
- Pump outlet: 3" NPT
- Motor diameter: 4 inch
Electrical Data:
- Motor type: MS4000
- Rated power - P2: 2.95 HP
- Main frequency: 60 Hz
- Rated voltage: 3 x 440-460 V
- Start. method: direct-on-line
- Service factor: 1,15
- Rated current: 5,65-5,80 A
- Cos phi - power factor: 0,80-0,75
- Rated speed: 3440-3460 rpm
- Enclosure class (IEC 34-5): 58
Dimensions and Measurements
Product Weight | 49.3 lbs. |
Dimensions and Measurements
Product Weight | 49.3 lbs. |
Characteristics and Features
Material | Stainless Steel |
Characteristics and Features
Material | Stainless Steel |
Electrical and Operational Information
Frequency | 60 Hertz |
Electrical and Operational Information
Frequency | 60 Hertz |
Related Grundfos Categories
Reviews
(0)