Follow Muir's step-by-step instructions for making a wine glass rack
Tools/Materials
T-Molding
Circular saw
Drill
Screws
Wine glasses
Show off your beautiful stemware and make this easy and quick wine glass rack. This optimizes cabinet space and is fun project to dip your DIY toes into.
Step by Step Instructions
Step 1
Measure out the t-mold pieces. We used four pieces to hold 6 glasses.
Step 2
Pre-drill the t-mold pieces to make screwing these into the bottom of your cabinet easier.
Step 3
Screw on the first t-mold to the bottom of your upper cabinets. Once you have the first one installed, you can determine where the rest need to go from there.
Step 4
Measure 2 and 1/4 inches between the t-molds for standard wine glass bottoms and measure less for champagne glasses. You will want to set the glass down on the counter and place two pieces of the t-mold on either side of the glass base. This will be the official measurement.
Step 5
Once you have screwed on all of the molds. Slide a glass' bottom through to make sure that they will fit and slide well.
Step 6
Add all of your wine glasses to your new rack and enjoy.
