Mitsubishi M-Series H2i 9,000 BTU Cooling / 14,000 BTU Heating 33.1 SEER One Zone Mini Split Condenser Unit

Please note: Mini splits must be installed by a professional according to your local codes. Any mini split installed otherwise will void any manufacturer warranty.

Outdoor condenser unit only, indoor evaporator unit(s) required for proper functionality. For questions or assistance building a multi-zone system, please call (855) 484-3292 to speak to one of our experts.

Product Technologies:

• Precision Temperature Control Technology: This condenser is equipped with inverter technology and an electronic linear expansion valve. By adjusting compressor speed and refrigerant flow, the output of the unit can be matched to the zone for precise temperature control and improved efficiency.

• Integrated Base Pan Heater: These FS Series outdoor condensers have a Factory-installed base pan heater in the drain pain. This prevents condensate from freezing and damaging the unit in frigid climates.

• H2i Technology: Low or negative ambient temperatures won't bother the FS Series. They are rated for 100% heating capacity at -5 degrees and 70% to 81% heating capacity at -13 degrees Fahrenheit.

• Hot-Start: Mitsubishi's hot-start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.

Specifications:

• Cooling BTU Capacity: 9000
• Heating BTU Capacity: 14000
• Zone Capacity: 1
• Sound Level: 48 dB
• Low Ambient Heating: Yes
• Minimum Outdoor Temperature for Heating: -13 F
• Minimum Outdoor Temperature for Cooling: 14 F
• Liquid Line Connection Size: 1/4" Inch
• Gas Line Connection Size: 3/8" Inch
• Depth: 11-1/4"
• Height: 21-5/8"
• Width: 31-1/2"
• Recommended Breaker Size: 15 A
• Voltage: 208, 230V

Product Assurance:

• Certifications:
  • AHRI
  • ETL
• Performance and Efficiency:
  • EER: 19.05
• Manufacturer Warranty: 5 Year Parts, 7 Year Compressor

Required Components:

• Disconnect Box and Electrical Whip Kit: The disconnect box and whip kit gives an easy way to connect your outdoor condenser to your fuse box
• Base Pan Heater (Optional): The base pan heater stops ice from building up on the outdoor unit, preventing performance degradation and potential damage
• Outdoor Condenser Plastic Pad (Optional): An outdoor condenser pad provides an even surface on which to place your outdoor condenser
• Wall Bracket (Optional): A wall bracket provides a way to mount your outdoor condenser off the ground to keep it clear it of debris