Rene 33" Drop In Double Basin Granite Composite Kitchen Sink with Basin Rack and Basket Strainer

A granite quartz sink, split evenly into two basins; but with one shorter to allow contemporary placement of the faucet along the back where they meet. This topmount sink has a wide-rimmed perimeter, and a ledge along the back with scored faucet and accessory holes. The R3-2001 is constructed from a unique blend of ground quartz (80%), acrylic (20%). Overall it measures 33" x 22" x 9 1/2". Its deep basins are inherently quiet, stain-resistant, scratch-resistant, and even heat-resistant to temperatures up to 550 degrees. It is guaranteed by a limited lifetime warranty, with template and mounting hardware included. To protect the sink surface from scratches or dents, two superior-quality, custom-fitted, stainless steel grids are included. The removable rubber feet raise them slightly above the bottom of the sink. Included is one strainer to catch random waste, and one flange for use with a disposal; both in a matching finish.

Rene R3-2001-CGF Features:

• TRENDSETTING STYLING – Offset bowls allow distinctive, tucked, faucet installation along back rim
• UNCOMMON FORMULATION – Quartz and acrylic fuse into a firm, hygienic surface
• TOPMOUNT – Designed for installation above the countertop; presenting contemporary elegance
• QUIET PERFORMANCE – Inherently dense material is resistant to the transfer of sound
• EXTREME DURABILITY – Able to resist staining, scratching, and excessive heat
• SUPPORTIVE EXTRAS – Matching strainer and flange, stainless steel grids
• Covered under Rene's limited lifetime warranty
• Constructed of granite composite
• Drop in installation - sink will drop into a cutout in the countertop
• Sink features dual basins with a 55/45 split
• Rear drain location increases available space under the sink

Specifications:

• Sink Length: 33"
• Sink Width: 22"
• Sink Height: 9-1/2"
• Basin Dimensions (Left): 14-1/2" L x 18-1/8" W x " D
• Basin Dimensions (Right): 14-1/2" L x 16-1/8" W x " D
• Faucet Holes: 0 (minimum number of holes required for installation)