Skip to main content
Item # bci2811356
Rinnai
Finish: White
Item # bci2811356

Rinnai 38" Roof Discharge Termination

Model:184162PP

$93.50
Finish: White -
58 In Stock
placeholder
FREE Delivery by Thursday
If ordered in the next 6 hrs 5 mins
-
Return & Shipping Details

Details

38" Roof Discharge Termination

The Rinnai 184162PP, Roof Discharge Terminal has an all plastic concentric bi-flow vent pipe assembly length of 3" and is only to be used as part of the vent system for a Rinnai RC80i, RC80HPi, RC98i and RC98HPi Condensing Tankless Water Heater. The upper assembly is 20" long and runs up above the roof line penetration. The lower assembly is 18" long and runs down below the roof line penetration. Purchase of this assembly also includes one supporting vent pipe clamp. This vent fitting requires zero clearance to combustibles.

Plastic Outer Vent For Intake

  • Easy To Cut Compared To Stainless Steel
  • Dent And Impact Resistant
  • Corrosion-Proof
  • Non-Flammable Material (ul94-V0)
  • Seamless Extruded Materials
  • Casted Elbows And Adapters
  • White Semi-Gloss Finish (Eu Ral 9016)

Aluminum Inner Vent For Exhaust

  • Easy To Cut Compared To Stainless Steel
  • Stable, Thick-Walled Material
  • Dent And Crease Resistant
  • Not Affected By Scratches
  • Seamless Extruded Material
  • No Weld lines
  • Thick-Walled, Casted Elbows And Adapters
  • Lightweight
  • Seal Rings With Maximum Temperature 400°F (Approx. 200°C)

Features:

  • GSA Approved
  • 20" Section Above Roof Line
  • 18" Section Below Roof Line
  • Zero Clearance To Combustibles
  • Engineered Especially For Gas Appliance Venting
  • Positive Fit And Lock Allows For Installation Assurance
  • Two Layers Of Pipe Equals Two Layers Of Protection
  • Seals At Every Joint Expand And Contract With Weather And Temperature Changes, So There's No Flexing Or Cracking In The Venting
  • No Flammable, Messy Or Harmful Glues, Cements, Or Solvents Are Used
  • Single Penetration Through Wall For Both Intake And Exhaust
  • Professional Installation Recommended

Specifications:

  • Depth: 4-7/8"

For Rinnai Certified Installation:

Contact Rinnai at 844-348-4715

Additional Rinnai Links

Manufacturer Resources

Warranty

Dimensions and Measurements

Depth
4.875 in.
Pipe Inside Diameter
4 in.
Product Weight
5.5 lbs.

Dimensions and Measurements

Depth
4.875 in.
Pipe Inside Diameter
4 in.
Product Weight
5.5 lbs.

Characteristics and Features

Configuration
Termination
Vent Construction
Double Wall

Characteristics and Features

Configuration
Termination
Vent Construction
Double Wall

Warranty and Product Information

Approved for Commercial Use
No

Warranty and Product Information

Approved for Commercial Use
No

Related Rinnai Categories