4 Light Direction Wall Light Fixture with J-Box and Driver from the Ledra Collection
The Ledra Quattro with J-Box and Driver fixture emits four light rays. Suitable for indoor use. The small size, long life, lack of UV, and cool beam allows for a wide variety of applications. Ledra fixture is dimmable if used with appropriate Ledra dimming driver. Refer to a drive specification sheet for correct installation.
- 100-240V AC, 50/60Hz input
- 700mA DC constant current output
- 6VA, 3W for 1 (3 Watt LED)
- White source of 110 lumens
- Warm White source of 96 lumens
- Suitable for dry locations only
- 2 1/4" hole cutout
- Required material thickness 3/16" - 1 1/16"
- Not thru-wired rated
- Short circuit protection
- Overload protection
- Thermal protection
All 3 Watt LED fixtures are warranted to be free from defects in material and workmanship for three (3) years from date of delivery.
About Bruck Lighting Systems:
Since its beginnings, Bruck Lighting Systems has operated under the principles of providing energy efficient lighting without compromising superior quality. With seven different track and cable systems, spot fixtures, display fixtures, decorative pendants, and sconces, low-voltage lighting has always been the focus.
As technology develops new energy efficient light sources, Bruck continues to design new and innovative products to utilize the latest lighting advancements. Two primary advancements that embody energy efficiency are Light Emitting Diodes (LEDs) and Compact Fluorescents. Bruck now offers an LED track system, multiple LED fixtures including some that are adapted for 12V track systems, LED pendants and sconces, and 18W compact fluorescent decorative pendants.
Additional Bruck Lighting Links
Bruck Lighting 135215ch Product Specifications
|Light Direction||Up / Down Lighting|
|Number of Bulbs||1|
|Suggested Room Fit||Bedroom, Dining Room, Kitchen|
|Watts Per Bulb||3|
Installation Resource Center
Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.