Faucet body and handles feature all-brass construction
Fully covered under Danze’s limited lifetime faucet warranty
High-quality finishing process – finish covered under lifetime warranty
Bathroom faucets from Danze are engineered to function flawlessly and feature enduring designs
Smooth single handle operation
Matching grid drain assembly included
ADA compliant handle
Low lead compliant – meeting federal and state guidelines for lead content
WaterSense Certified – uses at least 30% less water than standard 2.2 GPM faucets while still hitting strict performance guidelines
Designed for use with standard U.S. plumbing supply bibs
All hardware required for faucet installation is included
Product Technologies and Benefits:
Water-Saving Faucet: Danze takes a vested interest in helping to protect our world’s most precious resource, water. A low-flow aerator conserves 30% or more water when compared to the industry standard 2.2 gallon-per-minute models. The best part about WaterSense faucets is you compromise absolutely nothing in the way of performance; they are held to the same strict guidelines as any model produced.
Drip-Free Ceramic Disc Valves: By making these components standard across all of their bathroom faucets, Danze has made leaking and rough operating faucets a thing of the past. These valves provide a lifetime of smooth handle control, and never allow a drop of water out of place. They are maintenance free and are sturdy enough to withstand the most severe conditions.
Overall Height: 13-9/16" (measured from mounting deck to highest point on faucet)
Spout Height: 10-1/2" (measured from mounting deck to spout outlet)
Spout Reach: 5-1/2" (measured from center of faucet body to center of spout outlet)
Mounting Style: Vessel
Faucet Holes: 1 (number of holes required for faucet installation)
Flow Rate: 1.5 gallons-per-minute
1 handle included with faucet
Maximum Deck Thickness: 2" (cannot mount on decks thicker without extension kit)
Whether you are installing the product yourself or hiring a professional, our installation Resource Center has everything you need to get your project done. Visit the Installation Resource Center to get started.
Danze D201542 Reviews
Rated 5 out of
Beautiful additionThis faucet adds the perfect touch to my tiny bathroom.Kind of like a conversation piece.
Date published: 2012-04-10
Rated 5 out of
QualityThis shipped very quickly. The quality is excellent and the handle has a nice smooth motion to it. Great water pressure amount, so it doesn't blast out and splash all over. The spout does rotate, but I haven't found that to be any problem. It installed with no problems, and I'm very happy with this faucet.
Date published: 2011-02-15
Rated 5 out of
Overall impressionsFaucet feels solidly-built. As others have noted, the actual spout can swivel 360 degrees - this isn't so much of a "feature" once installed, it's so that the faucet can be mounted in any direction (control lever on the left or right hand side, or you could mount the faucet in a corner angled at 45 degrees, etc.) The water comes out in a smooth, non-aerated type of stream (no "psssssh" sound), and the throw of the stream comes to maybe an inch and a half from the center of the drain on my 16" round vessel sink, with the faucet body about 3/4" from the outside edge of the sink. A 1 3/8" deck hole works fine for installation. I was actually surprised how rock-solid the whole unit feels once installed, since the lower piece of the faucet body is basically just a sheath that goes over the internal plumbing. It all gets squeezed together when tightened from below, and there's no wiggle or play at all.
Date published: 2014-09-29
what is the spout reach on this faucet? how high is the control lever?
A. The Danze D201542 is 7 1/4" to the handle and has a spout reach of 5 1/2".
Where do I get a drain that combines this faucet?
A. The Danze D201542 comes with a Brass grid strainer in the selected finish.
Two questions on the strainer drain: 1) does the finish match the faucet, i.e. will it also be brushed nickel? 2) how does the cover work on a grid drain? Thanks for the quick reply on my prev question.
A. Yes the Danze D201542 strainer will match the faucet. The grid drain cover is simply a cap of sorts that covers the grid. Please let me know if you have any further questions.
I am installing a vessel sink that's 5 inches high. Will the control lever be high enough to clear sink?
A. The Danze D201542 is 8" at the base of the control lever. Yes, it is quite high enough to clear a 5" sink!
What country are the Danze faucets made in?
A. The Danze D201542, and all Danze parts are made in Taiwan.
Buy the Danze D201542BN in Brushed Nickel at Build.com. Research Danze D201542BN in Brushed Nickel online. Find Danze D201542BN in Brushed Nickel features and specifications. Get the best deal by comparing the Danze D201542BN in Brushed Nickel today.
The cost to ship items varies by item, shipment and shipping option.
Free Ground Shipping on Orders Over $49 *
Standard ground shipping transit time is 5-7 business days.
Free Freight Shipping on Orders Over $1500 *
Curb side delivery (also called freight or "LTL" shipping) is reserved for large, heavy, or oversized items like chandeliers, bathtubs, shower doors, etc. Items are palletized and loaded onto a large truck for shipment, and delivered to your curb by scheduled appointment. Transit time is 7-10 business days.
* For exact shipping costs, add the product(s) to your cart and enter your zip code. All offers pertain to the lower 48 states and do not include deliveries to Alaska, Hawaii or Canada.